I reckon if you can afford the $$ and hassle to import them and fit them, you can afford the $$ and the hassle to get them engineered
| ausmini https://www.ausmini.com/forums/ |
|
| kad rear disc brakes https://www.ausmini.com/forums/viewtopic.php?f=2&t=59607 |
Page 1 of 1 |
| Author: | r32 [ Tue Dec 15, 2009 5:27 pm ] |
| Post subject: | kad rear disc brakes |
are these legal to be used in the state of queensland ? do i need mod plate or can they jst be bolted on and go on a road registered car,thanks |
|
| Author: | GT mowog [ Tue Dec 15, 2009 5:49 pm ] |
| Post subject: | |
I'm not up to speed with the Qld regulations, however almost certainly a non-factory modifiction to brakes will need an engineer's sign off... |
|
| Author: | awdmoke [ Tue Dec 15, 2009 6:05 pm ] |
| Post subject: | |
http://www.transport.qld.gov.au/resources/file/ebde8d0521b67c6/Pdf_modification_motor_vehicles2.pdf As I read it, you will need a mod plate. |
|
| Author: | Danny [ Tue Dec 15, 2009 6:22 pm ] |
| Post subject: | |
I reckon if you can afford the $$ and hassle to import them and fit them, you can afford the $$ and the hassle to get them engineered
|
|
| Author: | awdmoke [ Tue Dec 15, 2009 6:32 pm ] |
| Post subject: | |
Not engineer, "Approved Person" 
|
|
| Author: | drmini in aust [ Tue Dec 15, 2009 6:33 pm ] |
| Post subject: | |
awdmoke wrote: Not engineer, "Approved Person"
Which is..what?? I wonder. 
|
|
| Author: | Morris 1100 [ Tue Dec 15, 2009 6:35 pm ] |
| Post subject: | |
Can Gafmo fit a mod plate? 
|
|
| Author: | Danny [ Tue Dec 15, 2009 6:47 pm ] |
| Post subject: | |
No, I don't approve of him 
|
|
| Author: | poeee [ Tue Dec 15, 2009 7:27 pm ] |
| Post subject: | |
Morris 1100 wrote: Can Gafmo fit a mod plate?
Is he handy with a rivet gun? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|