As The Heading Says!
As you may see, the bonnet has 2 holes for Badges on BOTH side!
What Clubman has this Bonnet??? And so i can tell they look like Factory holes! The Body number for this car is a Std Early 71 Clubman!
| ausmini https://www.ausmini.com/forums/ |
|
| What Clubman runs this Bonnet and What Badges go on it? https://www.ausmini.com/forums/viewtopic.php?f=2&t=59636 |
Page 1 of 2 |
| Author: | Benyni [ Wed Dec 16, 2009 7:36 pm ] |
| Post subject: | What Clubman runs this Bonnet and What Badges go on it? |
As The Heading Says!
As you may see, the bonnet has 2 holes for Badges on BOTH side! What Clubman has this Bonnet??? And so i can tell they look like Factory holes! The Body number for this car is a Std Early 71 Clubman! |
|
| Author: | Harley [ Wed Dec 16, 2009 7:40 pm ] |
| Post subject: | |
They're not badge holes, not factory ones anyway. I'd say some clever person did it themselves or had a home made stone deflector or something on there. |
|
| Author: | Morris 1100 [ Wed Dec 16, 2009 7:41 pm ] |
| Post subject: | |
They are not factory holes. No Clubman or Leyland Mini had badges on the bonnet. |
|
| Author: | Benyni [ Wed Dec 16, 2009 7:46 pm ] |
| Post subject: | Oh well |
Thats Crap! I thought i might have been special for a moment then!! Will have to get something to cover them up now! All after a new paint job too! Frickin Panel beat was supposed to weld them up! Will Have to put Leather Straps on now! I hate Pins! |
|
| Author: | JC [ Wed Dec 16, 2009 7:50 pm ] |
| Post subject: | |
Nice colour though! |
|
| Author: | Harley [ Wed Dec 16, 2009 7:50 pm ] |
| Post subject: | |
Maybe Sue Ridge will buy it off you for her Clubman Cooper SSS. 
|
|
| Author: | DTrain [ Wed Dec 16, 2009 8:06 pm ] |
| Post subject: | |
get them to weld it up and repair the bonnet, if you asked them to do it then they should have! |
|
| Author: | paul_ewins [ Wed Dec 16, 2009 8:25 pm ] |
| Post subject: | |
I rather suspect that they were for bonnet straps in the first place. |
|
| Author: | michaelb [ Wed Dec 16, 2009 8:33 pm ] |
| Post subject: | |
I does look good though... 
|
|
| Author: | mini maxx [ Wed Dec 16, 2009 8:45 pm ] |
| Post subject: | |
Nice color mate, but run the bonnet back to yer paint guys, those holes have no place on a clubbie bonnet, if you asked em to weld em up they should have welded em up |
|
| Author: | kimini [ Wed Dec 16, 2009 8:50 pm ] |
| Post subject: | |
hey benyni, nice colour, my dads monaro used to be very similar to that. |
|
| Author: | Benyni [ Wed Dec 16, 2009 9:00 pm ] |
| Post subject: | Panel Beaters!!! |
Nah Over there s h i t ! The Manager can go and beat his own meat! i know i should get them to weld it but i'll just get straps for it! they'll look good! anyway their spray painter walked out last friday after having a falling out with the manager ! |
|
| Author: | AEG163job [ Wed Dec 16, 2009 9:14 pm ] |
| Post subject: | Re: Panel Beaters!!! |
Benyni wrote: anyway their spray painter walked out last friday after having a falling out with the manager !
maybe the manager didn't appreciate his work, cos that is a very nice paint job I reckon. |
|
| Author: | Convertible Mini [ Thu Dec 17, 2009 6:00 am ] |
| Post subject: | Bonnet holes. |
If the car had Bonnet straps it would have the holes on the front frame for the other end of the straps. Have you looked for those ? Or instead of getting rid of un necessary holes you will add more ? Yes Nice Paint Job and colour. |
|
| Author: | HighlandRob [ Thu Dec 17, 2009 6:57 am ] |
| Post subject: | |
That's a very nice colour. The paint job looks terrific. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|