There's a few of us using this
| ausmini https://www.ausmini.com/forums/ |
|
| What's the best distributor for a 1275...... https://www.ausmini.com/forums/viewtopic.php?f=2&t=59780 |
Page 1 of 2 |
| Author: | bamnfi [ Wed Dec 23, 2009 1:06 pm ] |
| Post subject: | What's the best distributor for a 1275...... |
Am not looking for a Pulsar dizzy, but what do folks think is the best distributor for a 60 thou over Cooper S motor with 1.5 roller rockers? Aldon, 123? Appreciate any advice. cheers, bam |
|
| Author: | Lillee [ Wed Dec 23, 2009 1:09 pm ] |
| Post subject: | |
A properly rebuilt with all new parts stock Cooper S dissy. |
|
| Author: | bamnfi [ Wed Dec 23, 2009 1:13 pm ] |
| Post subject: | |
Lillee wrote: A properly rebuilt with all new parts stock Cooper S dissy.
Thx Lillee. Who does re-builds? Can a reasonably competent weekend mechanic do it?Are you talking converting to electronic as well? |
|
| Author: | 850man [ Wed Dec 23, 2009 1:27 pm ] |
| Post subject: | |
A Scorcher would be my suggestion, built to your specs. http://www.performanceignition.com.au Unit 47, 41 - 49 Norcal Road Nunawading 3131 Victoria Australia Tel (03) 9872 3644 Fax (03) 9873 2646 |
|
| Author: | GT mowog [ Wed Dec 23, 2009 3:42 pm ] |
| Post subject: | |
850man wrote: A Scorcher would be my suggestion, built to your specs.
http://www.performanceignition.com.au Unit 47, 41 - 49 Norcal Road Nunawading 3131 Victoria Australia Tel (03) 9872 3644 Fax (03) 9873 2646 That would also be my vote. These use readily avaiable Bosch parts. |
|
| Author: | lil-ute [ Wed Dec 23, 2009 4:44 pm ] |
| Post subject: | |
i bought an aldon dizzy from england correct curve and whatever else it needed for $280 delivered cheers and merry christmas |
|
| Author: | GT mowog [ Wed Dec 23, 2009 4:57 pm ] |
| Post subject: | |
bamnfi wrote: Who does re-builds? Can a reasonably competent weekend mechanic do it?Are you talking converting to electronic as well? The bushings in the stock lucas distributors are re-known for wearing fairly quickly. For this you'll need a lathe to re-bush the distributor body. All other parts you only need normal hand tools. |
|
| Author: | LS1380 [ Wed Dec 23, 2009 8:17 pm ] |
| Post subject: | |
There's a few of us using this
|
|
| Author: | bamnfi [ Wed Dec 23, 2009 8:52 pm ] |
| Post subject: | |
LS1380 wrote: There's a few of us using this
For the hard of seeing!!! What is that? |
|
| Author: | drmini in aust [ Wed Dec 23, 2009 9:06 pm ] |
| Post subject: | |
It's a Pertronix Ignitor II distributor and Flamethrower coil. 
http://www.vintageperformance.com/retro ... eries1.htm Cheaper to buy from there, but yes there is a distributor for these in Oz. |
|
| Author: | bamnfi [ Thu Dec 24, 2009 2:12 pm ] |
| Post subject: | |
drmini in aust wrote: It's a Pertronix Ignitor II distributor and Flamethrower coil.
http://www.vintageperformance.com/retro ... eries1.htm Cheaper to buy from there, but yes there is a distributor for these in Oz. Thanks Doc. Appreciate the link. What specific model should I go for? Btw, thanks for all your input and answers to my often naff questions. Have a great Christmas and an adult beverage or two
cheers, bam. |
|
| Author: | drmini in aust [ Thu Dec 24, 2009 2:18 pm ] |
| Post subject: | |
D170600 is what LS1380 and I got. It's the Pertronix II model. The dizzys are machined in China and assembled in USA (so they say). I'd get a 0.6 ohm coil to go with it... 45001 is the chrome one. 45011 if you want black. I sold mine, only because the stroker motor went into storage. 
|
|
| Author: | TheMiniMan [ Thu Dec 24, 2009 6:59 pm ] |
| Post subject: | |
Ahhh,,, there`s a distributor for those distributors here,,,so those distributors distribute those distributors here in Aust through their own distributor distribution centre?,,, cool 
|
|
| Author: | Morris 1100 [ Thu Dec 24, 2009 7:49 pm ] |
| Post subject: | |
TheMiniMan wrote: Ahhh,,, there`s a distributor for those distributors here,,,so those distributors distribute those distributors here in Aust through their own distributor distribution centre?,,, cool 
|
|
| Author: | jasonf [ Thu Dec 24, 2009 8:15 pm ] |
| Post subject: | |
The best distributor is no distributor Go Megajolt  
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|