| ausmini https://www.ausmini.com/forums/ |
|
| Rear Seat Support Holes?? https://www.ausmini.com/forums/viewtopic.php?f=2&t=59834 |
Page 1 of 1 |
| Author: | phillb [ Sun Dec 27, 2009 11:53 am ] |
| Post subject: | Rear Seat Support Holes?? |
My rear seat central support has a series of holes, the top and bottom ones are original, I think all minis have these and perhaps were used during assembly of the body. However someone (i think) has added a large hole and two smaller ones above and below (see pic) I cannot imagine what the purpose of these would be. Any ideas? 
|
|
| Author: | 850man [ Sun Dec 27, 2009 11:56 am ] |
| Post subject: | |
that would be the hole for a battery cut off switch i reckon 
|
|
| Author: | Ricks mini [ Sun Dec 27, 2009 1:06 pm ] |
| Post subject: | |
Plus 1 for battery isolation switch Cheers |
|
| Author: | drmini in aust [ Sun Dec 27, 2009 2:57 pm ] |
| Post subject: | |
Plus another...
|
|
| Author: | phillb [ Sun Dec 27, 2009 3:09 pm ] |
| Post subject: | |
Yep, battery switch does make sense. Thanks, I didn't think of that. Also am I correct in that the other two holes, the ones at the top and the bottom, are present on all minis. The top one is slightly larger than the bottom one I think. |
|
| Author: | LS1380 [ Sun Dec 27, 2009 6:06 pm ] |
| Post subject: | |
I just posted this pic in another Topic- but it does show only one hole as standard 
|
|
| Author: | Morris 1100 [ Sun Dec 27, 2009 6:16 pm ] |
| Post subject: | |
Here is my 68 Cooper S... 
|
|
| Author: | drmini in aust [ Sun Dec 27, 2009 6:24 pm ] |
| Post subject: | |
Here is my 1970 MiniMatic- 
|
|
| Author: | phillb [ Sun Dec 27, 2009 8:30 pm ] |
| Post subject: | |
LS1380 wrote: I just posted this pic in another Topic- but it does show only one hole as standard
Maybe your lower hole is hidden by the carpet. |
|
| Author: | phillb [ Sun Dec 27, 2009 8:35 pm ] |
| Post subject: | |
Morris 1100 wrote: Here is my 68 Cooper S...
Hey same year and colour as mine.  I was thinking holes were for a jig used during assembly and with the different size holes it could only go on the jig the one (correct ) way. Carpet usually seems to cover the lower hole.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|