Ausmini
It is currently Mon Jul 21, 2025 5:59 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
GtiMini
 Post subject: Crusty RHS tank
PostPosted: Fri Apr 01, 2005 8:18 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Jan 21, 2005 10:59 am
Posts: 141
Location: Brisbane
I've managed to pick up a right side fuel tank very cheap but its rusty. There was 2 small holes that I've repaired so it doesn't leak now. But, the inside of the tank is very crusty looking.

To clean it I put in about 200 small lead sinkers and shook the tank for about 10 minutes, then flushed out all the crud with a garden hose and water.

Is there something I can put in the tank to help preserve it while its in use? Something that will sit in the bottom or coat the inside of it to stop it rusting any further and won't be affected by constant soak with fuel. And most importantly something that won't end up in the engine.

Thanks for any advice/suggestions.


Last edited by GtiMini on Fri Apr 01, 2005 8:25 pm, edited 1 time in total.

Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Apr 01, 2005 8:20 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
Go to a motorbike shop, there's a product made specially for this. Coats the whole insides with a resin-like material. It will never leak again. :P

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
poeee
 Post subject:
PostPosted: Fri Apr 01, 2005 8:21 pm 
Offline
1360cc
1360cc
User avatar

Joined: Tue Mar 16, 2004 8:55 am
Posts: 11264
Location: Geelong, Victoria
When full of fuel it wont rust. They wont rust unless moisture gets in there.

_________________
Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Fri Apr 01, 2005 8:24 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39755
Location: near Baulkham Hills, NSW
poeee wrote:
When full of fuel it wont rust. They wont rust unless moisture gets in there.

Um... heating during the day then overnight cooling will pull moisture laden air in there, the water condenses and lays in the bottom of the tank `coz it's heavier. How do I know this? I own a BOAT... :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
GtiMini
 Post subject:
PostPosted: Fri Apr 01, 2005 8:30 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Jan 21, 2005 10:59 am
Posts: 141
Location: Brisbane
drmini in aust wrote:
Go to a motorbike shop, there's a product made specially for this. Coats the whole insides with a resin-like material. It will never leak again. :P


This sounds good. Thanks for the tip.
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Fri Apr 01, 2005 9:22 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
this one comes highly recommended....

http://www.ppc.au.com/category33_1.htm

and I have bought from these guys....super service!!!!
Top
 Profile  
 
GtiMini
 Post subject:
PostPosted: Fri Apr 01, 2005 9:29 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Jan 21, 2005 10:59 am
Posts: 141
Location: Brisbane
Awww brilliant!!! Thanks guys.

Enjoy the vid I just posted to the video section.
Top
 Profile  
 
aussie
 Post subject:
PostPosted: Fri Apr 01, 2005 9:36 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Nov 13, 2004 2:47 am
Posts: 5518
Location: Adelaide
im just picturing you shaking a fuel tank with 200 lead sinkers in it for 10 minutes... :lol:
Top
 Profile  
 
GtiMini
 Post subject:
PostPosted: Fri Apr 01, 2005 9:38 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Jan 21, 2005 10:59 am
Posts: 141
Location: Brisbane
aussie16 wrote:
im just picturing you shaking a fuel tank with 200 lead sinkers in it for 10 minutes... :lol:


Sooooowww whhaaatss sooooo funnnnnyy abbbooout thaatttt?
Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Fri Apr 01, 2005 9:48 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
who needs to go to the gym.... :lol:
Top
 Profile  
 
JC
 Post subject:
PostPosted: Fri Apr 01, 2005 9:58 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Jun 03, 2004 2:56 pm
Posts: 3981
Location: Brisbane
Gtimini's neighbours.....

"What's the freak up to now"
"Oh, he's dancing around the back yard wearing a hula skirt shaking a giant maracca"

Tee hee....

_________________
But he's thriving and striving and hugging the turns.
Top
 Profile  
 
GtiMini
 Post subject:
PostPosted: Fri Apr 01, 2005 10:08 pm 
Offline
848cc
848cc
User avatar

Joined: Fri Jan 21, 2005 10:59 am
Posts: 141
Location: Brisbane
You've been peeking again havn't you!!! :lol:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.