Got the subframes back from the sandblaster today. All good and clean.
Going to paint them with KBS gloss black....post to follow
| ausmini https://www.ausmini.com/forums/ |
|
| Update: Subframe Porn Part 1: Foreplay https://www.ausmini.com/forums/viewtopic.php?f=2&t=60087 |
Page 1 of 1 |
| Author: | mtsmini [ Thu Jan 07, 2010 6:50 pm ] |
| Post subject: | Update: Subframe Porn Part 1: Foreplay |
Got the subframes back from the sandblaster today. All good and clean.
Going to paint them with KBS gloss black....post to follow
|
|
| Author: | AEG163job [ Thu Jan 07, 2010 10:29 pm ] |
| Post subject: | |
your garage just like mine mate, needs a good clean out not even room to swing a cat 
|
|
| Author: | mtsmini [ Mon Jan 11, 2010 10:10 am ] |
| Post subject: | Garage |
My shed is a disgrace. 
It started out as my area then suprise, suprise, kids bikes, wife's excess furniture, surfboards and a whole lot of other crap arrived uninvited. 
But agree...needs a good cleanout. Once I get the Mini on a spit and out for sandblasting then I'll probably get after it.... |
|
| Author: | Mearcat [ Mon Jan 11, 2010 10:21 am ] |
| Post subject: | |
So how did the painting go? I am interested to hear what the KBS paint is like to work with (and whether you remembered - or knew - to seal the tin with gladwrap (If it's anything like the POR-15 , you'll never be able to open it again if you put the lid straight back on the tin). |
|
| Author: | mtsmini [ Mon Jan 11, 2010 10:24 am ] |
| Post subject: | Mini |
I'll get some photo's up in the next days or so. Painting went well. Apart from "Do not get paint on hands as it will not come off"! I wish I had read this first. I used rubber gloves for the second coat! |
|
| Author: | ministar [ Mon Jan 11, 2010 10:29 am ] |
| Post subject: | |
Looking good mike! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|