| ausmini https://www.ausmini.com/forums/ |
|
| Brake Master Cylinder https://www.ausmini.com/forums/viewtopic.php?f=2&t=60451 |
Page 1 of 1 |
| Author: | mmiller6512 [ Wed Jan 20, 2010 2:12 pm ] |
| Post subject: | Brake Master Cylinder |
Hello Everybody. How to tell a brake and a clutch master cylinder apart. They came uninstalled so i am confused well more confused than normal. Thanks ! |
|
| Author: | drmini in aust [ Wed Jan 20, 2010 3:25 pm ] |
| Post subject: | |
2 differences on tin can ones: 1. The mounting flanges are different. When fitted correctly the tin cans are splayed outwards relative to the bodies. 2. Brake is 0.70" bore, clutch is .75". For plastic tank ones, `2' above applies. |
|
| Author: | Bubbacluby [ Wed Jan 20, 2010 4:20 pm ] |
| Post subject: | |
on the plastic resoviour ones. One cast body says 7" on the side the other the 7" has been ground off (thats how mine is). and which is for which is as doc says |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|