Yes they are. All A series 1275s mains are same, S or non-S.
| ausmini https://www.ausmini.com/forums/ |
|
| Are 1275LS main bearings.... https://www.ausmini.com/forums/viewtopic.php?f=2&t=61138 |
Page 1 of 1 |
| Author: | mickmini [ Tue Feb 16, 2010 5:16 pm ] |
| Post subject: | Are 1275LS main bearings.... |
... the same size as Cooper S? cheers michael |
|
| Author: | drmini in aust [ Tue Feb 16, 2010 5:22 pm ] |
| Post subject: | |
Yes they are. All A series 1275s mains are same, S or non-S.
|
|
| Author: | Convertible Mini [ Tue Feb 16, 2010 5:36 pm ] |
| Post subject: | LS Main bearings. |
But Don't forget the Big ends are different as they have a bigger BE Journal. 1.75 inch from memory compared to Cooper S 1.625inch. |
|
| Author: | drmini in aust [ Tue Feb 16, 2010 6:20 pm ] |
| Post subject: | Re: LS Main bearings. |
Convertible Mini wrote: But Don't forget the Big ends are different as they have a bigger BE Journal. 1.75 inch from memory compared to Cooper S 1.625inch.
Not mickmini's- it's a stroker like mine- with S rods in. |
|
| Author: | mickmini [ Tue Feb 16, 2010 10:23 pm ] |
| Post subject: | |
Thanks Kev, just checking. I can get my hands on some NOS Vandervell bearings of the good type, so I wanted to make sure they fit..... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|