Here is a couple that may help. Not sure if this is what you are after.
| ausmini https://www.ausmini.com/forums/ |
|
| Need pictures of Weber carbie https://www.ausmini.com/forums/viewtopic.php?f=2&t=61387 |
Page 1 of 1 |
| Author: | miniDave [ Sat Feb 27, 2010 7:53 pm ] |
| Post subject: | Need pictures of Weber carbie |
Having a look at a mini tomorrow with a weber setup but having problems with the linkage and return springs. Any photo's as a guide would be appreciated. Regards and thanks |
|
| Author: | jester99 [ Sat Feb 27, 2010 9:39 pm ] |
| Post subject: | |
Here is a couple that may help. Not sure if this is what you are after.
|
|
| Author: | Flute [ Sun Feb 28, 2010 7:45 am ] |
| Post subject: | |
The top one is mine (disregard the central brake vacuum take off from the manifold, I changed it to just one side). The weber linkages seem to work well. Some prefer the wheel type and other prefer the type I have, personal choice I guess. |
|
| Author: | Austin850 [ Sun Feb 28, 2010 8:47 am ] |
| Post subject: | |
Here's mine 
|
|
| Author: | miniDave [ Sun Feb 28, 2010 9:20 am ] |
| Post subject: | |
Fantastic! 
Many thanks - will let you know what I find out. Appreciate all your help. Regards |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|