thanks deluxe i believe it to be rod change
| ausmini https://www.ausmini.com/forums/ |
|
| quickshift clubman https://www.ausmini.com/forums/viewtopic.php?f=2&t=61495 |
Page 1 of 1 |
| Author: | subwayseth [ Wed Mar 03, 2010 8:21 pm ] |
| Post subject: | quickshift clubman |
hey guys as I'm ordering a package tonight from the UK i need to know which quickshift will fit a 74 clubman 1100 4spd van, anybody know? |
|
| Author: | blue_deluxe [ Wed Mar 03, 2010 8:24 pm ] |
| Post subject: | |
Have a look under the car at the gearshift, if theres a big aluminum case its remote if not itd be rod change. Or theres a chance it could be a magic wand, where they gearstick comes out the bulkhead. |
|
| Author: | subwayseth [ Wed Mar 03, 2010 8:30 pm ] |
| Post subject: | |
thanks deluxe i believe it to be rod change
|
|
| Author: | drmini in aust [ Wed Mar 03, 2010 8:36 pm ] |
| Post subject: | |
Best (and cheapest) so-called `quickshift' for a rodchange is get a hacksaw and shorten the one you've got. 
Half the ones sold out there don't fit or work properly. If the linkage is sloppy, fix that first- don't rely on a quickshift to take up the slack. 
BTW they are really a shortshift, not a quickshift. |
|
| Author: | subwayseth [ Wed Mar 03, 2010 8:46 pm ] |
| Post subject: | |
yea okay, i figured tho i needed a new one anyway due to the old one being previously snapped off & somebody done a dodgy job at welding it back on  . why are people so mean to minis 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|