ausmini
https://www.ausmini.com/forums/

Sealing Seams
https://www.ausmini.com/forums/viewtopic.php?f=2&t=61539
Page 1 of 1

Author:  gbsmini [ Sat Mar 06, 2010 12:05 pm ]
Post subject:  Sealing Seams

I sealed the seams under the front guards with sicaflex-11FC. When I painted bitumen underseal under the guards it reacted to the sicaflex & has stayed very sticky only where the seams are. What is normally used. I have to do the roof etc & dont want problems when painting

Author:  GT mowog [ Sat Mar 06, 2010 12:13 pm ]
Post subject: 

Smash Repair suppliers have a product simply called Paintable Seem Sealer. It is usually applied by brush.

Author:  gbsmini [ Sat Mar 06, 2010 2:05 pm ]
Post subject: 

Went & bought some sealer Thanks

Author:  micowen [ Sat Mar 06, 2010 3:38 pm ]
Post subject: 

Teroson make an alright seam sealer called 4in1. Brush it, squeeze it (with a caulking gun), or spray it with a seam sealer gun. Wurth(less :D ) make a good one as well.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/