thanks. but ive only got two wires coming out of mine... red and black that go into a plug, out of the plug comes the white and black and white and yellow wires..
i sense fun
| ausmini https://www.ausmini.com/forums/ |
|
| a+ electronic dissy wiring https://www.ausmini.com/forums/viewtopic.php?f=2&t=61925 |
Page 1 of 1 |
| Author: | meeni [ Sun Mar 21, 2010 7:19 pm ] |
| Post subject: | a+ electronic dissy wiring |
hey guys ive got an a plus engine that im sticking in meeni, im wondering about the wiring for the electronic ignition. i cant remember how i had it on the race car its got a yellow and white wire and a black and white wire coming out of it, where do they go? are there more wires i need? cheers guys sean |
|
| Author: | GT mowog [ Sun Mar 21, 2010 7:28 pm ] |
| Post subject: | |
From the module the red and blue wires go to the dissy pick-up, black is earth, white is positive & coil positive (via ignition switch), white / black trace, coil -ve & tacho (RVI Type). |
|
| Author: | meeni [ Sun Mar 21, 2010 7:31 pm ] |
| Post subject: | |
thanks. but ive only got two wires coming out of mine... red and black that go into a plug, out of the plug comes the white and black and white and yellow wires.. i sense fun
|
|
| Author: | GT mowog [ Sun Mar 21, 2010 7:34 pm ] |
| Post subject: | |
The info above came from the factory metro W/S manual. I think that it is for a lucas module. It sounds like yours might be the Aldon Ignitor module. Any chance of a pic? |
|
| Author: | meeni [ Sun Mar 21, 2010 7:51 pm ] |
| Post subject: | |
heres a few.. not sure if it will shed any light 
|
|
| Author: | GT mowog [ Sun Mar 21, 2010 8:08 pm ] |
| Post subject: | |
Yeah, it is a Lucas one, but I don't have reliable info on it. I'll look in to it. |
|
| Author: | meeni [ Sun Mar 21, 2010 8:25 pm ] |
| Post subject: | |
thanks mate anyone else got any idea? |
|
| Author: | TheMiniMan [ Sun Mar 21, 2010 8:43 pm ] |
| Post subject: | |
I have the wiring diagram in my computer for that one (somewhere) but i can tell you that both wires go to the coil,,, & if it don`t work one way round then it will the other way round 
true |
|
| Author: | meeni [ Sun Mar 21, 2010 8:54 pm ] |
| Post subject: | |
lol thats easy.. i actually brought up a pic of my old race engine just now and saw it went to the coil, all i gotta do now is zoom in as to which goes on pos and which is on neg.. how hard can it be 
|
|
| Author: | KLAS [ Sun Mar 21, 2010 8:58 pm ] |
| Post subject: | |
TheMiniMan wrote: I have the wiring diagram in my computer for that one (somewhere) right, try white-black to negative and white-yellow to positive side first.
but i can tell you that both wires go to the coil,,, & if it don`t work one way round then it will the other way round true |
|
| Author: | TheMiniMan [ Sun Mar 21, 2010 9:17 pm ] |
| Post subject: | |
hee hee,,, funny enough i think it`s the other way round,,,even tho our aussie looms would suggest Blk/whte goes to coil Neg i`m still searching for the diag in my computer
|
|
| Author: | meeni [ Sun Mar 21, 2010 9:54 pm ] |
| Post subject: | |
will it cause damage if i get it wrong? if not il just put one either side and see.. |
|
| Author: | TheMiniMan [ Sun Mar 21, 2010 10:14 pm ] |
| Post subject: | |
nup,,, if it`s wrong then it just won`t go,,, if its right (& as long as everything else is right, carb etc) then it will just go verooom
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|