One piece or off the roll cut to size?
I guess if a pro does it, it shouldn't leak at all!
Whos windscreen doesn't leak?
| ausmini https://www.ausmini.com/forums/ |
|
| W/screen rubbers https://www.ausmini.com/forums/viewtopic.php?f=2&t=62107 |
Page 1 of 1 |
| Author: | Benyni [ Tue Mar 30, 2010 12:12 pm ] |
| Post subject: | W/screen rubbers |
| One piece or off the roll cut to size?
I guess if a pro does it, it shouldn't leak at all!
Whos windscreen doesn't leak?
|
|
| Author: | Mick [ Tue Mar 30, 2010 1:53 pm ] |
| Post subject: | |
I can't see a pro reason for an off-the-roll rubber if single piece rubbers are available for the same money, but I have a single up front and a cut down at the rear and neither leak... |
|
| Author: | marc2131 [ Tue Mar 30, 2010 7:04 pm ] |
| Post subject: | |
Would think the single piece would look better. Mine comes from a roll, and yes it does leak (when parked in the open). I assume it always came in a roll; but if I can get it as one piece, i'd go for that instead. |
|
| Author: | drmini in aust [ Tue Mar 30, 2010 7:39 pm ] |
| Post subject: | |
The `one piece' rubbers are made the same way (off a roll) then cut to length by the supplier and the ends glued. I find they fit better in the corners, as by the time you fit them they are nearly the right shape. But I have had rear 1 piece Mk1 rubbers that were cut too long, no way would they fit. |
|
| Author: | mtsmini [ Wed Mar 31, 2010 3:48 pm ] |
| Post subject: | Rubbers... |
I prefer the thin ones with the ridges...jesus wrong forum, delete, delete.... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|