| ausmini https://www.ausmini.com/forums/ |
|
| Morris Rad https://www.ausmini.com/forums/viewtopic.php?f=2&t=6213 |
Page 1 of 2 |
| Author: | gafmo [ Sat Apr 09, 2005 9:37 am ] |
| Post subject: | Morris Rad |
Well I pulled it out this morning and I think it need some work.. 
But guess what else I found..14ml socket..I wounderd where that got to. but also dam Alternator bracket Broken. Click on the Pic for a better size 
..Looks like Marcia will be giving her 17acr again 
Any one interested in a how to pull a Rad info sheet Edited to add pic's 
|
|
| Author: | IwannaMini [ Sat Apr 09, 2005 10:01 am ] |
| Post subject: | |
I AM.. last time I did it to replace the engine mount it took me ages. Do you have an info sheet on the order of putting the damn thing back in..?? |
|
| Author: | mini_me [ Sat Apr 09, 2005 10:11 am ] |
| Post subject: | radiator |
Hi gafmo, can i have your instruction sheet as well. I'm going to put a new 3 core radiator in shortly Thanks felix |
|
| Author: | 1310/71 [ Sat Apr 09, 2005 12:08 pm ] |
| Post subject: | Re: Morris Rad |
gafmo wrote: Well I pulled it out this morning and I think it need some work..
told ya, told ya 
Good time to do it before it gets too hot again (ambient I mean). Anton, myself and chong have been round at the Doc's doing various bits and pieces - wondered where you'd got to 
KB |
|
| Author: | gafmo [ Sat Apr 09, 2005 12:37 pm ] |
| Post subject: | |
Well its sort of finished..as per normal I had a fight with those bolts that lock in the suround and the Rad  but at least the bottom rad pipe went around the suround with ez both times
You know those little bolts on the front and rear as per normal
Water pump spun easly
Marcia has donatted here Alternator (lost count now) 17acr and of course the brackets are differnt and the bottom bolt size is differnt
Can some one remind me with the wireing do the two big terminals of the 17acr go to the same spot on the solinoid No troubles I'll do up a shet for you's |
|
| Author: | J_A_M [ Sat Apr 09, 2005 2:12 pm ] |
| Post subject: | Re: Morris Rad |
gafmo wrote: But guess what else I found..14ml socket..I wounderd where that got to.
The day I bought my Lancer, I had some ass bandit run into me.... When the panel beaters cut the front rad support panel off, they found a large socket INSIDE the chassis rail.....which means someone had put it there, then welded the rad support in place, trapping the socket in the chassis rail..... 
The bastard kept it......  My car + socket in chassis rail = my socket! (even though I didn't put it there)
|
|
| Author: | gafmo [ Sat Apr 09, 2005 2:50 pm ] |
| Post subject: | |
I still don't think it fixed..Warmed it up and pumped the Top radiator hose and it wanted to sit on half again...Plus the Ign light is on
I did get this Alternator fixed after it died last time! I have also another spare Alternator which is D.E.D so i thought Excellent just change the Covers Over that nut on the end does not want to come off . I'll let it soak in WD40 for a while before I throught something 
|
|
| Author: | gafmo [ Sat Apr 09, 2005 6:49 pm ] |
| Post subject: | |
Wife took it for a spin up to local servo..H straight away and IGn light on..now I'm pissed and will have another look at it tomorrow... All pipes are clear and thermo only resently new. I can only think thier is a blockage in the head or block
If this head come off some thing else will go on 
|
|
| Author: | 850_Van [ Sat Apr 09, 2005 7:31 pm ] |
| Post subject: | |
check your temp sensor |
|
| Author: | gafmo [ Sat Apr 09, 2005 8:00 pm ] |
| Post subject: | |
Yer I'll pull that out tomorrow morning
I also have one of Wombats regulators inside Binical to change but I can't find the paper that came with it..I'll change that also tomorrow moring also |
|
| Author: | 1310/71 [ Sat Apr 09, 2005 11:00 pm ] |
| Post subject: | |
gafmo wrote: Yer I'll pull that out tomorrow morning
I also have one of Wombats regulators inside Binical to change but I can't find the paper that came with it..I'll change that also tomorrow moring also I have the bit of paper from mine but I'm out tomorrow. If you need it post tonight or in the morning, and I'll check the forum before I leave. I think it is black for common, red for 12 volt supply and the other colour (white?) the regulated 10/10.5V or whatever. You can check by following the trace on the backing sheet (PCB) and working out which one goes to earth, which one comes from the plug (+12v), and which one goes to the instruments(+10.5v). KB |
|
| Author: | drmini in aust [ Sat Apr 09, 2005 11:07 pm ] |
| Post subject: | |
Yes that code is correct. I just fitted 2 of 'em..
|
|
| Author: | gafmo [ Sun Apr 10, 2005 6:31 am ] |
| Post subject: | |
if you could just let me know what red and White connect to...Black Earth Cheers
|
|
| Author: | drmini in aust [ Sun Apr 10, 2005 6:47 am ] |
| Post subject: | |
Red goes to the live green wire, black goes to the earth lug on speedo, white one- fit a double spade connector and it then goes to the 2 light green/brown wires- fuel and temp gauges.
|
|
| Author: | gafmo [ Sun Apr 10, 2005 6:51 am ] |
| Post subject: | |
| Cheers Keven...Wifey still asleep so i'll start banging when see wakes up...I also reliase I have a temp gauge on my altermeter so I'll give that a go also...
But i'm going to lunch and the inlaws are over at 10:30 this morning so not a lot I can do today
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|