Has anyone wired one of these up?? Whats the wiring diagram??
Cheers Brett
| ausmini https://www.ausmini.com/forums/ |
|
| Smiths RPM Wiring RVI https://www.ausmini.com/forums/viewtopic.php?f=2&t=62137 |
Page 1 of 1 |
| Author: | brett [ Wed Mar 31, 2010 3:20 pm ] |
| Post subject: | Smiths RPM Wiring RVI |
|
Has anyone wired one of these up?? Whats the wiring diagram?? Cheers Brett |
|
| Author: | mini-mini [ Wed Mar 31, 2010 3:32 pm ] |
| Post subject: | |
This might help: http://mk1-performance-conversions.co.uk/technical_electrical.htm |
|
| Author: | Angusdog [ Wed Mar 31, 2010 5:27 pm ] |
| Post subject: | |
|
|
| Author: | brett [ Wed Mar 31, 2010 9:13 pm ] |
| Post subject: | |
kida looks like the same pice of wire that goes from the coil wraps around the distributer thanks guys! 
|
|
| Author: | winabbey [ Thu Apr 01, 2010 8:31 pm ] |
| Post subject: | |
In case it isn't clear it's the pink diagram above and the dotted line means the wire between the coil and distributor has been removed. It's been replaced by a long white one that goes from the coil up to the tacho, looping through the plastic block, and then back to the distributor. Apologies if that was already clear. |
|
| Author: | brett [ Thu Apr 01, 2010 8:49 pm ] |
| Post subject: | |
yeah thanks got it working!! Suprise Suprise I double checked with my auto electrican, finished it off at front of the shop during working hours! 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|