AFAIK they are same as the 850, and are NLA new.
Somebody on here was going to try reproducing them in fibreglass? I think.
| ausmini https://www.ausmini.com/forums/ |
|
| Mini Deluxe Speedo Pod https://www.ausmini.com/forums/viewtopic.php?f=2&t=62157 |
Page 1 of 1 |
| Author: | BigGig [ Thu Apr 01, 2010 2:04 pm ] |
| Post subject: | Mini Deluxe Speedo Pod |
Does anyone know if the white plastic speedo pods that are in the deluxes are available to buy new. Can't find them anywhere. |
|
| Author: | drmini in aust [ Thu Apr 01, 2010 2:39 pm ] |
| Post subject: | |
AFAIK they are same as the 850, and are NLA new.
Somebody on here was going to try reproducing them in fibreglass? I think. |
|
| Author: | BigGig [ Thu Apr 01, 2010 2:59 pm ] |
| Post subject: | |
I did make one out of fibreglass for scooby but it was just a rough job (not painted or anything) because it was going behind the wooden dash. I might try and make a mold up and see if I can reproduce one with a gel coat finish. |
|
| Author: | Morris 1100 [ Thu Apr 01, 2010 4:44 pm ] |
| Post subject: | |
I think that the binnacle should be the next plastic bit to get reproduced after the washer bottle/master cylinder/seat belt hooks/fuel pump vent. |
|
| Author: | BBY755 [ Fri Apr 02, 2010 8:51 am ] |
| Post subject: | |
Usually there are plenty on ebay...... from $20-$200 |
|
| Author: | TheMiniMan [ Fri Apr 02, 2010 10:20 am ] |
| Post subject: | |
oh,,, is that a hint morris1100 ??? 
i know a fella who does them in fibreglass & i have carbon fibre ones being made , comming soon I have a carbon-fibre "S"/K Oval binical here right now if anyone is keen |
|
| Author: | Morris 1100 [ Fri Apr 02, 2010 1:07 pm ] |
| Post subject: | |
TheMiniMan wrote: oh,,, is that a hint morris1100 ??? Not quite a hint, more of a sharp prod.
i know a fella who does them in fibreglass & i have carbon fibre ones being made , comming soon Most of the second hand ones are cracked or about to crack. It would be nice to get a good low hours original type for the S. I am sure that a lot of 850 and Deluxe owners would like them too. I am not into the carbon look. Epoxy resin and soot does nothing for me. 
|
|
| Author: | TheMiniMan [ Fri Apr 02, 2010 10:09 pm ] |
| Post subject: | |
here`s our latest speedo pod (cooper S / Mini K) In Carbon-Fibre 
& yeah i know, I Know,,, i need a decent camera, Blah Blah Blah
|
|
| Author: | Kennomini [ Fri Apr 02, 2010 10:29 pm ] |
| Post subject: | |
The jell coat/resin is a bit cloudy Matt :lol: |
|
| Author: | TheMiniMan [ Fri Apr 02, 2010 10:53 pm ] |
| Post subject: | |
"Misty" ,,, not cloudy,,, it`s "Misty",,, short for "Mystical" It`s a special illusion i do on purpose cause then when people actually see them in the flesh , they look soooo much better & they simply HAVE to have one
|
|
| Author: | BBY755 [ Sat Apr 03, 2010 2:31 pm ] |
| Post subject: | |
Got any "Mystical" Mk1 Cooper S ones in plastic? 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|