ohohoh maybe you have a cooper!!!!
i dunno, im clubman boy, that old round stuff confuses me 
| ausmini https://www.ausmini.com/forums/ |
|
| engine and body number question https://www.ausmini.com/forums/viewtopic.php?f=2&t=6292 |
Page 1 of 1 |
| Author: | Flying Brick [ Tue Apr 12, 2005 10:23 am ] |
| Post subject: | engine and body number question |
Gday, my first question, please be gentle. On my 850, the body type on the complience plate is YKA2S1, on a list on the web this should be a Cooper body. The engine number on the complience plate says it is an 850, does anybody know what this means. Also do the 850's have the vehicle identification number on the panel near the radiator, it has been cut off my car. There is a number stamped on the firewall near the complience plate, is this the VIN?? Steve. |
|
| Author: | Fruity [ Tue Apr 12, 2005 12:09 pm ] |
| Post subject: | Re: engine and body number question |
Flying Brick wrote: Gday, my first question, please be gentle.
On my 850, the body type on the complience plate is YKA2S1, on a list on the web this should be a Cooper body. My 850 is YMA2S1 |
|
| Author: | czerial [ Tue Apr 12, 2005 12:12 pm ] |
| Post subject: | |
ohohoh maybe you have a cooper!!!! i dunno, im clubman boy, that old round stuff confuses me
|
|
| Author: | scotty [ Tue Apr 12, 2005 7:55 pm ] |
| Post subject: | |
the number stamped on the firewall is the body number, it should match what's on the compliance plate, later cars had the number on the radiator shroud, me thinks. |
|
| Author: | Morris 1100 [ Tue Apr 12, 2005 7:59 pm ] |
| Post subject: | |
The number on the firewall is the car number (they had not invented VIN numbers yet) This number should match the number on the identification plate. (not a compliance plate because they had not been invented yet either!) |
|
| Author: | Flying Brick [ Wed Apr 13, 2005 8:08 am ] |
| Post subject: | |
Thanks for the replies, i had hoped that was the case with the VIN, i shouldn't have any trouble registering it then. I was worried because i didn't have any papers for it and the radiator shroud had been removed, bodgy job though. Thanks again. Steve. |
|
| Author: | 9YaTaH [ Thu Apr 14, 2005 12:21 pm ] |
| Post subject: | Re: engine and body number question |
fruity wrote: Flying Brick wrote: Gday, my first question, please be gentle. On my 850, the body type on the complience plate is YKA2S1, on a list on the web this should be a Cooper body. My 850 is YMA2S1 My 1963 850 is YMA2S1.... |
|
| Author: | Flying Brick [ Thu Apr 14, 2005 2:52 pm ] |
| Post subject: | |
Does this mean I can tell everyone I own an 850 Cooper??
Steve. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|