| ausmini https://www.ausmini.com/forums/ |
|
| weber probs https://www.ausmini.com/forums/viewtopic.php?f=2&t=62931 |
Page 1 of 1 |
| Author: | Minute [ Thu May 06, 2010 11:32 pm ] |
| Post subject: | weber probs |
Cant get the chokes out on my 40DCOE.. i want to check whats in it it looks like the 2 locking screws that hold the chokes in have been replaced by flat headed bungs.. is this correct for 40's? am i going to have to drill them out? Claeten |
|
| Author: | Austin850 [ Fri May 07, 2010 7:24 am ] |
| Post subject: | |
Don't know if it's the same on a 40 but on a 45 DCOE, the size of the choke is stamped so you can see it through the mouth of the carby. |
|
| Author: | drmini in aust [ Fri May 07, 2010 12:30 pm ] |
| Post subject: | |
Claeten, Don't drill them out! A 40DCOE has the choke tube and auxiliary venturi held in by the trumpet and clamp. (The 45DCOE has the locking screws). |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|