i paid $1250 for my metro 1275, about 8 years ago
| ausmini https://www.ausmini.com/forums/ |
|
| whats a 1275 worth??? https://www.ausmini.com/forums/viewtopic.php?f=2&t=62968 |
Page 1 of 2 |
| Author: | nathanm [ Sat May 08, 2010 8:18 pm ] |
| Post subject: | whats a 1275 worth??? |
Gday just wondering what a good running 1275 is roughly worth??? cheers Nathan |
|
| Author: | dove grey 64 [ Sat May 08, 2010 8:51 pm ] |
| Post subject: | |
i paid $1250 for my metro 1275, about 8 years ago
|
|
| Author: | Kennomini [ Sun May 09, 2010 10:18 am ] |
| Post subject: | |
I paid around $1400 from memory for an 1100 S with all it's accessories still attached ready to bolt in and rip it up. I've paid 1k for a bare A+ auto setup. Depending if it's just a bare engine, head and box in running order I'd guess any where between 1k through to 3k for a ready to bolt in 2nd hand unit. I'd imagine if it's cooper S or GT numbered it may be a little more. |
|
| Author: | MiniDna [ Sun May 09, 2010 11:12 am ] |
| Post subject: | |
Hi I paid around $1300 for my complete engine transmision and diff last year(second hand out of a 95 model Rover) |
|
| Author: | Wombat [ Sun May 09, 2010 12:50 pm ] |
| Post subject: | |
I paid $100 for an auto 1275  Then my son paid $400 in freight to get it to Rocky from Sydney
|
|
| Author: | superSeven [ Sun May 09, 2010 2:43 pm ] |
| Post subject: | |
i paid $3500 for mine, but it came with a car! |
|
| Author: | drmini in aust [ Sun May 09, 2010 2:46 pm ] |
| Post subject: | |
I've had blocks for $100 ea, cranks (std/std) for $50, a 1316 head for nix... but 'twas some years ago. |
|
| Author: | Smarty [ Sun May 09, 2010 2:47 pm ] |
| Post subject: | |
Hey doc I'll give you $200 for a block and std/std crank  That way you can make $50!! 
|
|
| Author: | drmini in aust [ Sun May 09, 2010 2:53 pm ] |
| Post subject: | |
Smarty wrote: Hey doc
I'll give you $200 for a block and std/std crank That way you can make $50!! Sorry the crank's in my 1412 stroker, and 1275 blocks (with caps) are worth more of krudd's dollars now.
|
|
| Author: | mercury [ Sun May 09, 2010 3:34 pm ] |
| Post subject: | |
wow some really good prices there. I really want to upgrade to a bigger engine. |
|
| Author: | drmini in aust [ Sun May 09, 2010 3:44 pm ] |
| Post subject: | |
Personally, I'd take an 1100S rebuilder and recondition it, every time. Parts are cheap. You don't know what condition S/H runners are really in, usually. I'd contact Josh `miniimports' in Melb if you want a late model goer though. He has a veritable pile of em.
|
|
| Author: | Smarty [ Sun May 09, 2010 4:32 pm ] |
| Post subject: | |
Hehe, I know!! |
|
| Author: | Fiji [ Sun May 09, 2010 6:57 pm ] |
| Post subject: | |
i got my runner from miniman about $1600 fitted... complete unit,, and she is. cheers maty she's going good bro.
|
|
| Author: | sgc [ Sun May 09, 2010 7:47 pm ] |
| Post subject: | |
Fiji wrote: i got my runner from miniman about $1600 fitted... complete unit,, and she is. cheers maty she's going good bro.
IT WAS YOU!!! I missed out on that one by a whisker 
|
|
| Author: | 850man [ Sun May 09, 2010 8:04 pm ] |
| Post subject: | |
I have been luckly enough to pick up complete 1100s manual & autos in M1100 S's at "Pick a part" for around $150 a few times. These days you should be able to purchase a complete A+ engine & trans for around $1000. Andrew at NMP must of brought hundreds of them in from the UK by now but I dont know what he charges for them these days. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|