Very bad this, as Graham says, he trusts us lot to just wander around, now this
Whoever you are; have a conscience and do the right thing
| ausmini https://www.ausmini.com/forums/ |
|
| Ken Elder head https://www.ausmini.com/forums/viewtopic.php?f=2&t=63071 |
Page 1 of 2 |
| Author: | GR [ Fri May 14, 2010 2:32 pm ] |
| Post subject: | Ken Elder head |
Hi Would the guy who took the Ken Elder head from my work shop on thursday please return it, just leave it at the door of my work shop or house one night or when ever and we'll leave it at that. we know all the people that the heads have been sold to and have a number stamped on them, and don't machine the number off as it will be easy to see as the little spigit will be a lot thinner. My work shop is open to any body as i trust the people that come here,maybe i should have a re think. Graham Russell |
|
| Author: | Maxi23 [ Fri May 14, 2010 3:26 pm ] |
| Post subject: | |
I hope they are smart enough to return it GR. |
|
| Author: | mikejnr [ Fri May 14, 2010 3:38 pm ] |
| Post subject: | |
thats low. |
|
| Author: | graham in aus [ Fri May 14, 2010 3:43 pm ] |
| Post subject: | |
Very bad this, as Graham says, he trusts us lot to just wander around, now this
Whoever you are; have a conscience and do the right thing
|
|
| Author: | simon k [ Fri May 14, 2010 3:44 pm ] |
| Post subject: | |
very low... it's a small world, if all the of clubs tell people to look out for it, it'll show up |
|
| Author: | drmini in aust [ Fri May 14, 2010 4:19 pm ] |
| Post subject: | |
What a low act! 
|
|
| Author: | floss [ Fri May 14, 2010 4:27 pm ] |
| Post subject: | |
head for a head I say. That is really poor form. |
|
| Author: | Hanra [ Fri May 14, 2010 4:35 pm ] |
| Post subject: | |
Where is Tiny these days? Not exactly the sort of thing that you just slip in your pocket and walk off with... |
|
| Author: | Lillee [ Fri May 14, 2010 4:44 pm ] |
| Post subject: | |
Geez how low (and dumb) would you be to do something like that
|
|
| Author: | blue_deluxe [ Fri May 14, 2010 4:54 pm ] |
| Post subject: | |
Is it possible to get a register up? Then we can trawl eBay and if one pops up that isn't there we have an Ausmini lynch mob that can visit them and reclaim it. |
|
| Author: | VulcanBB18 [ Fri May 14, 2010 7:31 pm ] |
| Post subject: | |
Man that's low I bet the selfish bastard wont be selling it, but putting it on their daily hack, probably f**king it up in the process
Hope it returns in the night. cheers, Jacob |
|
| Author: | GR [ Fri May 14, 2010 8:04 pm ] |
| Post subject: | |
Hi The silly thing about it is that we had only just started to modify it, it has no valve guides the seats have not been cut yet, so it's really only a bare head half finished. Graham Russell |
|
| Author: | Dennis Maher [ Fri May 14, 2010 8:14 pm ] |
| Post subject: | |
Pleased you put it on here Graham, I was going to stick it on if you didn You sounded PO'd today - hope it is returned Dennis |
|
| Author: | DTrain [ Fri May 14, 2010 8:31 pm ] |
| Post subject: | |
well its good to know that he cant just slap it straight on his motor, he'll need to bring it to a shop to get done. put the word out to your contacts and it will be sure to turn up somewhere |
|
| Author: | mattsmadmini [ Fri May 14, 2010 9:22 pm ] |
| Post subject: | |
dirty little low life... It'll rock up GR... one head or another... |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|