ausmini https://www.ausmini.com/forums/ |
|
simonBBC powermax distributors https://www.ausmini.com/forums/viewtopic.php?f=2&t=63239 |
Page 1 of 1 |
Author: | poeee [ Sun May 23, 2010 7:59 pm ] |
Post subject: | simonBBC powermax distributors |
So this Clubman i'm trying to get done before Hay needs a full tune. Dizzy is probably well stuffed (29D). Mind you I pulled out the dodgyness that the PO had done, and chucked in some old points I had laying around, gapped them by eye (probably not adventagous) and chucked in some BP5ES spark plugs from an old engine (looked new enough) as this thing had the wrong plugs. It now runs. I am going to fit one of these kits that Mick wrote a How To on. About $40 before postage. For about $120 I can get a brand new dizzy to go in. As seen here http://www.simonbbc.com/automotiveshop/ ... ermax-mini Any advice before I waste $120? |
Author: | GT mowog [ Sun May 23, 2010 8:03 pm ] |
Post subject: | Re: simonBBC powermax distributors |
poeee wrote: ................. Dizzy is probably well stuffed (29D).
Any advice before I waste $120? Throw the 29D in the bin. The Simonbbc's are very good......... <EDIT> But the Scorchers are better...... ![]() |
Author: | 1275LS [ Sun May 23, 2010 10:35 pm ] |
Post subject: | |
I put one of their 45D's in my 1275LS in March. Hasn't missed a beat yet. Easy to do as well. Old one out, new one in, set it to 10deg BTDC and off you go.. It does the rest. You can't program it though. Hope this helps. I have a couple of photos on another thread if you want a look.. http://www.ausmini.com/forums/viewtopic ... highlight= |
Author: | Mick [ Sun May 23, 2010 10:40 pm ] |
Post subject: | |
Any advice is moot now! He just went and got a a brand new one ![]() |
Author: | poeee [ Mon May 24, 2010 9:14 am ] |
Post subject: | |
At least I feel good about handing money over haha |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |