ausmini https://www.ausmini.com/forums/ |
|
Hairy underlay stuff https://www.ausmini.com/forums/viewtopic.php?f=2&t=63497 |
Page 1 of 1 |
Author: | rup [ Fri Jun 04, 2010 6:28 pm ] |
Post subject: | Hairy underlay stuff |
Some of the hairy underlay stuff under my rubber floor mats is rotten. ![]() (Actually doesn't look so bad in that piccy) What is the proper name for this stuff? Could they thought of a better way to trap moisture and promote rust in the floor? Is this stuff still available? Cheers |
Author: | VulcanBB18 [ Sat Jun 05, 2010 7:53 am ] |
Post subject: | |
It's Hessian They used hessian underlay under almost all carpets then. There is a foam alternative that most people use now, it still holds a bit of water doesn't rot. cheers Jacob |
Author: | Gadgets mini [ Sat Jun 05, 2010 11:36 am ] |
Post subject: | |
you could try bellybutton lint as an alternative ![]() |
Author: | drmini in aust [ Sat Jun 05, 2010 3:52 pm ] |
Post subject: | |
I run my carpets without underlay, I can't hear road noise with the Dellorto carb anyway. ![]() |
Author: | rup [ Sat Jun 05, 2010 5:08 pm ] |
Post subject: | |
Cheers. Might try nothing (or belly button lint) for a while and then see if I can clean up the enough of the original to get by - some of it is fairly yukko though. |
Author: | Flute [ Sat Jun 05, 2010 5:16 pm ] |
Post subject: | |
I leave mine out too and when I do a resto I am going to set the carpets up so they can be easily taken out to inspect underneath. Maybe with velcro. I will fix up all the leaks too to stop any rust coming back I hope! |
Author: | Morris 1100 [ Sat Jun 05, 2010 6:17 pm ] |
Post subject: | |
I double up on the carpet. I fit an old carpet on the bottom furry side down and then fit the other carpet the right way up. I also trim the bottom one a bit around all the edges to fit better. |
Author: | Monaco [ Sat Jun 05, 2010 10:09 pm ] |
Post subject: | |
You can also use the more modern stuff that can be purchased through Knox Carpets or Tru-fit. If you use nothing you will find overtime that you can see the floor pressing shape through the carpet. |
Author: | gafmo [ Sat Jun 05, 2010 10:15 pm ] |
Post subject: | |
what can we use as an alternative as I'm about to do this also |
Author: | subwayseth [ Sun Jun 06, 2010 9:46 pm ] |
Post subject: | |
why not just settle for a pair of ear plugs, if your deaf in one ear they'll last you twice as long ![]() |
Author: | EAB [ Sun Jun 06, 2010 10:25 pm ] |
Post subject: | |
rubber matting from clark rubber. works really well. you can get stuff with a grip pattern on both sides. insulating, sound deadening and water proof. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |