Hi Guys,

Just picked up an engine cheap from ebay, the engine number is 10YTah****, i've googled the model but everything comes up with 10YC or 10YJ, i believe it's a 1100 but am unsure.

Please help!!!

If it is a 1100 i can use the crank in the original 998 in my 68 deluxe as advised on an earlier post for more power for the 998.

Thanks
Al

1098cc... BLOCK at least
Someone could have done the dirty and put a 998 crank in.
Ok... highly unlikely.

try here...

http://www.elevenhundred.com/enginenum.php

Thanks for the info, i will strip it down and make sure its a 1100 crank!!

...& if it is an 1100 crank (12G82) get it crack tested! Over half the ones I've had tested had to be binned because of cracks

cheers

Jacob

_________________
'72 Clubman Van - 1022cc, 295 head, 731 cam - Daily Driver
'69 Morris 1100 S - Dinged by a bus, in shed under repair
'64 Morris 1100 - Early 1100, long term project

Are You sure it is not 10YaTah It is probably a 1100 cc the part number for an 1100 crank is 12G82 always check these for cracks

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"