ausmini
https://www.ausmini.com/forums/

Engine number
https://www.ausmini.com/forums/viewtopic.php?f=2&t=63819		 Page 1 of 1
Author:  alby911 [ Fri Jun 18, 2010 11:36 pm ]
Post subject:  Engine number
Hi Guys,

Just picked up an engine cheap from ebay, the engine number is 10YTah****, i've googled the model but everything comes up with 10YC or 10YJ, i believe it's a 1100 but am unsure.

Please help!!!

If it is a 1100 i can use the crank in the original 998 in my 68 deluxe as advised on an earlier post for more power for the 998.

Thanks
Al
Author:  willy [ Fri Jun 18, 2010 11:42 pm ]
Post subject: 
1098cc... BLOCK at least :lol:
Someone could have done the dirty and put a 998 crank in.
Ok... highly unlikely.
Author:  MINImal effort [ Fri Jun 18, 2010 11:51 pm ]
Post subject: 
try here...

http://www.elevenhundred.com/enginenum.php
Author:  alby911 [ Fri Jun 18, 2010 11:56 pm ]
Post subject: 
Thanks for the info, i will strip it down and make sure its a 1100 crank!!
Author:  VulcanBB18 [ Sat Jun 19, 2010 8:15 am ]
Post subject: 
...& if it is an 1100 crank (12G82) get it crack tested! Over half the ones I've had tested had to be binned because of cracks :cry:

cheers

Jacob
Author:  John Smidt [ Sat Jun 19, 2010 1:47 pm ]
Post subject:  Re: Engine number
alby911 wrote:
Hi Guys,

Just picked up an engine cheap from ebay, the engine number is 10YTah****, i've googled the model but everything comes up with 10YC or 10YJ, i believe it's a 1100 but am unsure.

Please help!!!

If it is a 1100 i can use the crank in the original 998 in my 68 deluxe as advised on an earlier post for more power for the 998.

Thanks
Al

Are You sure it is not 10YaTah It is probably a 1100 cc the part number for an 1100 crank is 12G82 always check these for cracks
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/