| ausmini https://www.ausmini.com/forums/ |
|
| Fibreglass Bonnet https://www.ausmini.com/forums/viewtopic.php?f=2&t=64023 |
Page 1 of 1 |
| Author: | knuts2au [ Sun Jun 27, 2010 10:34 pm ] |
| Post subject: | Fibreglass Bonnet |
Ok, son has just ordered the Zeemax fibreglass bonnet with the bulge, whats the rules in Vic. for fitting, are 4 hood pins legal? |
|
| Author: | Kennomini [ Mon Jun 28, 2010 6:30 pm ] |
| Post subject: | |
I think if it's smooth fighting it's more acceptable. Generally they don't like sharp pointy things on road cars. Depending on what year it is it may be fine, but to be sure check with your local transport dept. |
|
| Author: | knuts2au [ Mon Jun 28, 2010 7:52 pm ] |
| Post subject: | |
Rang Vicroads today the bird who takes the calls couldn't answer it, it wasn't on her list of standard questions, have to wait for an engineer to ring me back. |
|
| Author: | simon k [ Mon Jun 28, 2010 9:21 pm ] |
| Post subject: | |
for a pre-1971 car there no engineering necessary for a fibreglass front or bonnet in Victoria. Just put it on... |
|
| Author: | mickmini [ Tue Jun 29, 2010 5:47 am ] |
| Post subject: | |
simon k wrote: for a pre-1971 car there no engineering necessary for a fibreglass front or bonnet in Victoria. Just put it on...
but understanding the spirit of the pedestrian safety rules you should put flush fitting pins on it, near as dammit same price as sticky outy ones. also helps the aerodynamics 
|
|
| Author: | knuts2au [ Tue Jun 29, 2010 9:32 pm ] |
| Post subject: | |
Bonnet arrived today, has hinge supports glassed in so problem solved! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|