| ausmini https://www.ausmini.com/forums/ |
|
| what size are the tapered bolts that holds the drive flange https://www.ausmini.com/forums/viewtopic.php?f=2&t=64204 |
Page 1 of 1 |
| Author: | ryan [ Mon Jul 05, 2010 7:59 pm ] |
| Post subject: | what size are the tapered bolts that holds the drive flange |
the rotor on 7.5inch brakes? |
|
| Author: | GT mowog [ Mon Jul 05, 2010 8:01 pm ] |
| Post subject: | |
They are 1/4" UNF, not sure of the length off hand but around 1/2 to 5/8". <EDIT> Just checked. They are 5/8" Long and they are actually known as Countersunk Screws. |
|
| Author: | ryan [ Mon Jul 05, 2010 8:05 pm ] |
| Post subject: | |
thanks very much. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|