ausmini
https://www.ausmini.com/forums/

More tension settings please
https://www.ausmini.com/forums/viewtopic.php?f=2&t=64229		 Page 1 of 1
Author:  jester99 [ Tue Jul 06, 2010 10:39 pm ]
Post subject:  More tension settings please
Hi guys and gals

could someone please tell me what the torque settings are for the flywheel bolts, the centre hub to flywheel bolts/nuts. for a two peice flywheel.

also what the correct settings for the bolts that hold the diaphram down?

thanks in advance.

Jason :lol:
Author:  MiniKit [ Tue Jul 06, 2010 11:01 pm ]
Post subject: 
Set screw, driving strap to flywheel 16lb/ft
Set screw, Clutch spring housing to pressure plate 16lb/ft
Flywheel centre bolt 110 to 115 lb/ft

As per the Mini workshop manual I'm reading at the moment, but did I hear mention that there may have been a misprint in one of the books available?
Author:  jester99 [ Tue Jul 06, 2010 11:24 pm ]
Post subject: 
Yeh i already have those settings. 8)

what i really wanted was the tension for the flywheel centre hub bolts/nuts?

can anyone help?
Author:  justminis [ Wed Jul 07, 2010 7:33 am ]
Post subject: 
Search is your friend -

http://www.ausmini.com/forums/viewtopic.php?t=62332
Author:  jester99 [ Wed Jul 07, 2010 1:23 pm ]
Post subject: 
thanks justminis, exactly what i wanted to know. 8)
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/