Some MPI belts were still V types.
What you're after specifically is a 97 onwards Jap SPI pulley.
| ausmini https://www.ausmini.com/forums/ |
|
| Crank Damper - MPI https://www.ausmini.com/forums/viewtopic.php?f=2&t=64276 |
Page 1 of 1 |
| Author: | jbeenz [ Fri Jul 09, 2010 12:22 pm ] |
| Post subject: | Crank Damper - MPI |
I have an AC setup out of a late MPI - yay! but im missing the crank pulley, I have all the other brackets and pulleys etc. Does anyone know where i can find one? thats not 152 pounds!, I presume some of the Supercharger kits come with a pulley to suit the MPI poly belt? anyone broken up an mpi and biffed the crank pulley? Jed |
|
| Author: | Harley [ Fri Jul 09, 2010 12:27 pm ] |
| Post subject: | |
Some MPI belts were still V types. What you're after specifically is a 97 onwards Jap SPI pulley.
|
|
| Author: | KLAS [ Fri Jul 09, 2010 4:54 pm ] |
| Post subject: | |
i've never seen a MPi with V type belt. i have a MPi pulley, but shipping would be much to expensive, i think |
|
| Author: | NG [ Fri Jul 09, 2010 6:26 pm ] |
| Post subject: | |
hey buddy. my set up is V belt type. you can take you're compressor and get it changed over to the vbelt type. any electrical aircon place can do it, or send it away. try go direct, it will be cheaper 
the pulleys on the sc12 type are v belt type. pm 92 he may be able to sort you with something though. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|