ausmini
https://www.ausmini.com/forums/

What tyres to fit for copper head gaskets
https://www.ausmini.com/forums/viewtopic.php?f=2&t=64301		 Page 1 of 2
Author:  mini maxx [ Sat Jul 10, 2010 10:00 pm ]
Post subject:  What tyres to fit for copper head gaskets
ive recently bronzed in a copper head gasket on my card board mini clubman and need to know what tyres i should run to get the most out of this high performance mod i have just done, should i run a set of Mickey Thompson drag slicks, perhaps a set of Olympic crossplys or a full on set of Kubota ride on tyres. Im just not sure what tyre will give me the best traction considering the huge amount of extra lebowatts ill be packing. Maybe i should fit a rear wing to hold her down when i break the 200klmh mark or should i fit a front splitter aswell cos its front wheel drive.
Author:  jimmyinamini [ Sat Jul 10, 2010 10:04 pm ]
Post subject: 
i voted xplys best if they are white walled though they would handle fullysickbro
Author:  Tombo [ Sat Jul 10, 2010 10:05 pm ]
Post subject: 
Don't forget that if you do this to a clubby you will get about 13% more power than the same mod to a roundie, so is it a clubby or roundie?
Oh and is it a van? cos sedans are more streamlined.
Author:  mini maxx [ Sat Jul 10, 2010 10:05 pm ]
Post subject: 
I hear ya man, do you reckon one of those exhaust tips that lights up blue would be a good addition or should i go with the one that blows bubbles
Author:  Tombo [ Sat Jul 10, 2010 10:09 pm ]
Post subject: 
mini maxx wrote:
I hear ya man, do you reckon one of those exhaust tips that lights up blue would be a good addition or should i go with the one that blows bubbles
This
Image
Author:  jimmyinamini [ Sat Jul 10, 2010 10:09 pm ]
Post subject: 
mini maxx wrote:
I hear ya man, do you reckon one of those exhaust tips that lights up blue would be a good addition or should i go with the one that blows bubbles
youl; hafta ask michal jacson about the whole bubbles thing however adding a properly set up catch can can is about equal to a 7 percent killer wasp gain if you know what i mean
Author:  mini maxx [ Sat Jul 10, 2010 10:13 pm ]
Post subject: 
Tombo wrote:
Don't forget that if you do this to a clubby you will get about 13% more power than the same mod to a roundie, so is it a clubby or roundie?
Oh and is it a van? cos sedans are more streamlined.


Clubbie fer sure, ive tossed all the interior and glass for weight reduction and just have a racing milk crate 4 point harness and a fake nitros switch, deleted all doors and boot lid in favor of those real estate plackards made of plastic with lil holey, lines in em that make a really cool whistling noise like a gilmer drive when you do 60 klmh in a head wind, its fully sick mate, all the hot type chicks look when i roll past
Author:  mini maxx [ Sat Jul 10, 2010 10:15 pm ]
Post subject: 
jimmyinamini wrote:
mini maxx wrote:
I hear ya man, do you reckon one of those exhaust tips that lights up blue would be a good addition or should i go with the one that blows bubbles
youl; hafta ask michal jacson about the whole bubbles thing however adding a properly set up catch can can is about equal to a 7 percent killer wasp gain if you know what i mean


Will a milo tin do :?: or something more hard core like a red bull can
Author:  Tombo [ Sat Jul 10, 2010 10:18 pm ]
Post subject: 
What motor are you using? it's pointless using a little one, you need at least an 1100 wit a big carby, the best carby is a webber.
Author:  mini maxx [ Sat Jul 10, 2010 10:20 pm ]
Post subject: 
Yeah 850 bored out to 1310 with a holley 350 double pumper with a chromed auto choke
Author:  MiniKit [ Sat Jul 10, 2010 10:26 pm ]
Post subject: 
You should add an electric supercharger and a Garrett turbo so then you can suck in lots of cold air and then pump it out again even faster good for atleast 850 jiggawatts of power. I've got a 1946 bedford truck radiator that you can use as an intercooler. It would look really mint with some chrome spraypaint.
Author:  mini maxx [ Sat Jul 10, 2010 10:29 pm ]
Post subject: 
Yeah, ill swap you twin overhead sumps for the radiator/intercooler. Ill send a cat over to pick it up
Author:  jimmyinamini [ Sat Jul 10, 2010 10:31 pm ]
Post subject: 
with all that power id defenatly be runnen a nine inch 64 spleen mini spool wid 411ns and a light weight paint lodn not to mention tripple noelethane brushes
Author:  MiniKit [ Sat Jul 10, 2010 10:37 pm ]
Post subject: 
And you will need this to steer it with, with all that powa, except no susbstitute...

Image
Author:  mini maxx [ Sat Jul 10, 2010 10:42 pm ]
Post subject: 
wow, cool, does that come with a delorian badge or is it the atari2600 version :?:
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/