You can get fuel hose anywhere, EFI stuff isn't needed on a carby car but doesn't hurt to have something a bot tougher.
Fuel line tube is easier to obtain from a brake place.
| ausmini https://www.ausmini.com/forums/ |
|
| Fuel Lines https://www.ausmini.com/forums/viewtopic.php?f=2&t=64424 |
Page 1 of 1 |
| Author: | MiniMe87 [ Fri Jul 16, 2010 1:03 pm ] |
| Post subject: | Fuel Lines |
Hi All, Almost finished my engine rebuild, just want to get some new fuel lines....can these be picked up at any car parts store??? (REPCO etc) Cheers |
|
| Author: | Harley [ Fri Jul 16, 2010 1:06 pm ] |
| Post subject: | |
You can get fuel hose anywhere, EFI stuff isn't needed on a carby car but doesn't hurt to have something a bot tougher. Fuel line tube is easier to obtain from a brake place.
|
|
| Author: | GT mowog [ Fri Jul 16, 2010 1:22 pm ] |
| Post subject: | |
Standard Hose s 1/4" (or 6mm). |
|
| Author: | drmini in aust [ Fri Jul 16, 2010 3:11 pm ] |
| Post subject: | |
I find Dayco fuel hose (made in USA) is good stuff, it doesn't go hard with unleaded fuel like cheapo hoses do. I get it from Bursons these days. |
|
| Author: | MiniMe87 [ Sat Jul 17, 2010 6:20 pm ] |
| Post subject: | |
thanks guys!! was meant to do it today, but helped a mate out replacing an inlet pipe on a 2000 subaru forester GT.........still havent finished.......absolute pain in the A55!!!! give me a mini any day!!! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|