This is a diagram of a Morris 1100 horn from the workshop manual.
Is the Mini horn the same?
| ausmini https://www.ausmini.com/forums/ |
|
| Mini horn- Is it the same? https://www.ausmini.com/forums/viewtopic.php?f=2&t=64591 |
Page 1 of 1 |
| Author: | MG Rocket [ Fri Jul 23, 2010 8:21 pm ] |
| Post subject: | Mini horn- Is it the same? |
This is a diagram of a Morris 1100 horn from the workshop manual. Is the Mini horn the same?
|
|
| Author: | Morris 1100 [ Fri Jul 23, 2010 8:24 pm ] |
| Post subject: | |
It is almost the same. The way the contact in the top of the column sits and the way the button works are different but the layout is similar. |
|
| Author: | MG Rocket [ Fri Jul 23, 2010 8:31 pm ] |
| Post subject: | |
Does the Mini have a spring loaded contact coming up through the middle of the column? |
|
| Author: | Morris 1100 [ Fri Jul 23, 2010 8:35 pm ] |
| Post subject: | |
MG Rocket wrote: Does the Mini have a spring loaded contact coming up through the middle
of the column? Yes, but it pokes up further than the 1100 one. |
|
| Author: | MG Rocket [ Fri Jul 23, 2010 8:39 pm ] |
| Post subject: | |
Morris 1100 wrote: MG Rocket wrote: Does the Mini have a spring loaded contact coming up through the middle of the column? Yes, but it pokes up further than the 1100 one. Ah, good. Could you give an estimation of how much further....would be just a couple of mm? |
|
| Author: | Morris 1100 [ Fri Jul 23, 2010 8:42 pm ] |
| Post subject: | |
From memory about 10 to 15mm further. The plunger and spring under the contact are much longer. |
|
| Author: | MG Rocket [ Fri Jul 23, 2010 8:46 pm ] |
| Post subject: | |
Morris 1100 wrote: From memory about 10 to 15mm further. The plunger and spring under the contact are much longer. That's quite a bit.
Thanks again Morry for your usual encyclopedic knowledge. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|