I have an original hydro pump and I need
a new shraeder pressure fitting.
Does any one know where I can buy one in Sydney or Aus
Thanks Felix

_________________
1967 Morris mini Deluxe
1968 Buick Riviera
1979 HZ Kingswood
1979 CM Valiant
1982 Jaguar XJ6 series 3
2002 VX HSV
2013 Mazda 6
2018 Gt Mustang

Hi Felix,
They are advertized on e-Bay UK from time to time but darned expensive. The one on my machine seems to be a standard tyre inflation fitting that has had a air-bleed manufactured (possibly by Churchill) andf fitted to it.

Here in Christchurch, NZ, there is a company that supplies all the tyre shops with tools and hardware, they have a big selection of such fittings and are agents for Schrader. You might have someone like that locally, so I suggest you ring a tyre outfit and ask who supplies them.

Regards
Al

John at Mini King has complete new fittings.

_________________

thanks guys,I'll go to Mini King as he's just down the road

_________________
1967 Morris mini Deluxe
1968 Buick Riviera
1979 HZ Kingswood
1979 CM Valiant
1982 Jaguar XJ6 series 3
2002 VX HSV
2013 Mazda 6
2018 Gt Mustang

Apologies here, I just read your original posting again

The fitting on the pump that screw on to the schader valve is actually available from Parker Hydraulics. Be warned, they are about $85.......

Try Mini King, he may have them.

<EDIT> Parker's Part Number for the chuck is 8708150000

_________________

I got mine from RLM Distibuting (http://www.rlmdistributing.com.au) in Brisbane a couple of years ago now, I think it was in the order of $50 or so posted.

_________________
Simon

The adventures of an owner builder in the Tallarook Ranges

I realise you said you wanted one in Australia but thought this might be of interest. They also sell new versions of the pump itself (visit liquidlevers store).

http://cgi.ebay.com.au/CHURCHILL-SUSPEN ... ltDomain_3

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

The stock chuck is a clip on type and not a screw on. It does not really matter as long as it works. I have seen similar clip on chucks still available new.

Oh, the Churchill pumps and the Austaloy use different nuts on the other end of the hose if anyone is thinking of the ebay one from Liquidlevers.

Thanks all,I bought a fitting from "RLM Distibuting " BNE
as sgc suggested,$70 plus postage.
My original one was a clip on type,the new one is a screw on type.
It should fit straight onto the existing hose.
Regards Felix

_________________
1967 Morris mini Deluxe
1968 Buick Riviera
1979 HZ Kingswood
1979 CM Valiant
1982 Jaguar XJ6 series 3
2002 VX HSV
2013 Mazda 6
2018 Gt Mustang