| ausmini https://www.ausmini.com/forums/ |
|
| hydro pump https://www.ausmini.com/forums/viewtopic.php?f=2&t=64939 |
Page 1 of 1 |
| Author: | 1970cooper [ Wed Aug 11, 2010 6:38 am ] |
| Post subject: | hydro pump |
I have an original hydro pump and I need a new shraeder pressure fitting. Does any one know where I can buy one in Sydney or Aus Thanks Felix |
|
| Author: | 66S [ Wed Aug 11, 2010 6:46 am ] |
| Post subject: | |
Hi Felix, They are advertized on e-Bay UK from time to time but darned expensive. The one on my machine seems to be a standard tyre inflation fitting that has had a air-bleed manufactured (possibly by Churchill) andf fitted to it. Here in Christchurch, NZ, there is a company that supplies all the tyre shops with tools and hardware, they have a big selection of such fittings and are agents for Schrader. You might have someone like that locally, so I suggest you ring a tyre outfit and ask who supplies them. Regards Al |
|
| Author: | GT mowog [ Wed Aug 11, 2010 7:33 am ] |
| Post subject: | |
John at Mini King has complete new fittings. |
|
| Author: | 1970cooper [ Wed Aug 11, 2010 6:33 pm ] |
| Post subject: | |
thanks guys,I'll go to Mini King as he's just down the road |
|
| Author: | GT mowog [ Wed Aug 11, 2010 6:43 pm ] |
| Post subject: | |
Apologies here, I just read your original posting again 
The fitting on the pump that screw on to the schader valve is actually available from Parker Hydraulics. Be warned, they are about $85....... Try Mini King, he may have them. <EDIT> Parker's Part Number for the chuck is 8708150000 |
|
| Author: | sgc [ Wed Aug 11, 2010 6:49 pm ] |
| Post subject: | |
I got mine from RLM Distibuting (http://www.rlmdistributing.com.au) in Brisbane a couple of years ago now, I think it was in the order of $50 or so posted. |
|
| Author: | winabbey [ Wed Aug 11, 2010 7:07 pm ] |
| Post subject: | |
I realise you said you wanted one in Australia but thought this might be of interest. They also sell new versions of the pump itself (visit liquidlevers store). http://cgi.ebay.com.au/CHURCHILL-SUSPEN ... ltDomain_3 |
|
| Author: | Morris 1100 [ Fri Aug 13, 2010 5:57 am ] |
| Post subject: | |
The stock chuck is a clip on type and not a screw on. It does not really matter as long as it works. I have seen similar clip on chucks still available new. Oh, the Churchill pumps and the Austaloy use different nuts on the other end of the hose if anyone is thinking of the ebay one from Liquidlevers. |
|
| Author: | 1970cooper [ Fri Aug 13, 2010 6:24 am ] |
| Post subject: | |
Thanks all,I bought a fitting from "RLM Distibuting " BNE as sgc suggested,$70 plus postage. My original one was a clip on type,the new one is a screw on type. It should fit straight onto the existing hose. Regards Felix |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|