Picture from my Gregory's manual.. best photo I could manage, sorry..
| ausmini https://www.ausmini.com/forums/ |
|
| Headlight pieces required for reassembly https://www.ausmini.com/forums/viewtopic.php?f=2&t=64965 |
Page 1 of 1 |
| Author: | Mearcat [ Wed Aug 11, 2010 11:22 pm ] |
| Post subject: | Headlight pieces required for reassembly |
When I got my Mini (Clubman), it was mostly stripped and was supplied with a big bucket of parts, but I'm am now trying to figure out what parts I need to reinstall the headlights. All I have in the Bucket O' Parts was the metal bowls but I recall there is another chrome ring or something that is also used. So a few qu's : What are all the pieces and screws needed to install the headlight (for the Clubman)? Do the Clubbies have a adjusting kit for the lights? Where can you get the plastic "nuts" that insert in the headlight surround square slots for the (self tapping) screws? |
|
| Author: | MiniKit [ Wed Aug 11, 2010 11:32 pm ] |
| Post subject: | |
Plastic nuts can be bought from Super crap or Repco. As for the other questions I'd have to pull one apart, but yes there is another chrome ring that screws it to the bucket. |
|
| Author: | MiniKit [ Wed Aug 11, 2010 11:49 pm ] |
| Post subject: | |
Picture from my Gregory's manual.. best photo I could manage, sorry..
|
|
| Author: | Mearcat [ Thu Aug 12, 2010 8:24 pm ] |
| Post subject: | |
Awesome. That helps heaps. So there IS an adjusting spring... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|