ausmini
https://www.ausmini.com/forums/

How do the FRONT signal lenses stay in??
https://www.ausmini.com/forums/viewtopic.php?f=2&t=6527		 Page 1 of 2
Author:  KiwiMR2 [ Thu Apr 21, 2005 5:24 pm ]
Post subject:  How do the FRONT signal lenses stay in??
Im thinking of ordering these:

Image

How do the bits of glass actually attach to the car?? seems there is rubber bits......won't they fall out??

Cheers
KiwiMR2
Author:  EST-071 [ Thu Apr 21, 2005 5:35 pm ]
Post subject: 
these ones won't fit your car as they screw on and the ones on your car fit into the rubber.
Cheers Pete
Author:  KiwiMR2 [ Thu Apr 21, 2005 5:38 pm ]
Post subject: 
deluxe_68 wrote:
these ones won't fit your car as they screw on and the ones on your car fit into the rubber.
Cheers Pete


Ahhhh...well there ya go, I would have rushed out and brought them not knowing!! Cheers for that. Well my ones that are in the rubber.....if I need to change a bulb how do they come off?? am I right in syaing the rubber is just holding them in??

Cheers
KiwiMR2
Author:  9YaTaH [ Thu Apr 21, 2005 6:00 pm ]
Post subject:  Yep
KiwiMR2 wrote:
deluxe_68 wrote:
these ones won't fit your car as they screw on and the ones on your car fit into the rubber.
Cheers Pete


Ahhhh...well there ya go, I would have rushed out and brought them not knowing!! Cheers for that. Well my ones that are in the rubber.....if I need to change a bulb how do they come off?? am I right in syaing the rubber is just holding them in??

Cheers
KiwiMR2


Just carefully work a screwdriver around the rubber and get the chrome ring out....then do the sameagain for the lens...
Author:  68matic [ Fri Apr 22, 2005 10:34 am ]
Post subject: 
Quote:
How do the FRONT signal lenses stay in??


dodgily.
dad took one off and thought he put it back on again
its just a little tight fit between a chrome ring and a rubber ring that holds it together
and thats not even tight
Author:  Harley [ Fri Apr 22, 2005 10:50 am ]
Post subject: 
Mine was tight. Not one day having had the car my clever dad scratched the paint with a screwdriver trying to get the in or out, can't remember.
Be carefull!
Author:  71_mini_k [ Fri Apr 22, 2005 12:13 pm ]
Post subject: 
:D It a kind of magic :D
Author:  coops [ Fri Apr 22, 2005 12:25 pm ]
Post subject: 
HOPES AND DREAMS 8) :roll:
Author:  1380 yellow devil [ Fri Apr 22, 2005 1:58 pm ]
Post subject: 
If the rubbers are old they will be very hard to get back in as the rubber has gone hard. I fitted a new rubber and it went back together very easy.
Author:  64morris [ Fri Apr 22, 2005 5:13 pm ]
Post subject: 
where can i get whole new front indicator assemblies? and how much? mine are crap
Author:  coops [ Fri Apr 22, 2005 5:32 pm ]
Post subject: 
karcraft

1B9100<A> $46.05

LAMP - PARK LAMP+ INDICATOR ASSEMBLY

Karcraft is pretty much the be all and end all get yourself a catolgue i live at coffs harbour and everthing gets here the next day and cheap freight too. 8)
Author:  64morris [ Fri Apr 22, 2005 6:32 pm ]
Post subject: 
cool, is that for the rubber bit and the bulb holder and lense and everything?
how do i get my hands on a catalogue?
Author:  gafmo [ Fri Apr 22, 2005 11:09 pm ]
Post subject: 
www.karcraft.com
or 9737 9944 working days only :wink:
Also availiable on disc
Author:  drmini in aust [ Sat Apr 23, 2005 7:20 am ]
Post subject: 
gafmo wrote:
www.karcraft.com
or 9737 9944 working days only :wink:
Also availiable on disc

U left the `.au' off...
It's www.karcraft.com.au
or email [email protected]
:wink:
Author:  KiwiMR2 [ Tue Apr 26, 2005 7:10 pm ]
Post subject: 
deluxe_68 wrote:
these ones won't fit your car as they screw on and the ones on your car fit into the rubber.
Cheers Pete


Hey how can you tell from the pic it only fits screw on ones?? I saw a MK4 in the weekend JUST LIKE MINE with the silver ring and rubber BUT with clear indicator glass like the ones above.

Cheers
KiwiMR2
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/