Hi All, can anyone tell me the standard height of the front donuts in a Clubbie and are rear ones a good replacement for flogged out front ones
Thanks, The Catman
| ausmini https://www.ausmini.com/forums/ |
|
| Donut height https://www.ausmini.com/forums/viewtopic.php?f=2&t=65453 |
Page 1 of 1 |
| Author: | mini maxx [ Sat Sep 04, 2010 1:25 pm ] |
| Post subject: | Donut height |
Hi All, can anyone tell me the standard height of the front donuts in a Clubbie and are rear ones a good replacement for flogged out front ones Thanks, The Catman
|
|
| Author: | 850man [ Sat Sep 04, 2010 1:38 pm ] |
| Post subject: | |
About this big... 
Rear donuts can be used in the front as they are often not as buggered as the front ones, tho late clubbie donuts dont have the hole in them for the compresssion tool so you have to take the top arm out to fit them. 
|
|
| Author: | GT mowog [ Sat Sep 04, 2010 1:43 pm ] |
| Post subject: | |
PM sent mate. Oh and ANSWER YOUR GODDAMM PHONE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
|
| Author: | mini maxx [ Sat Sep 04, 2010 2:00 pm ] |
| Post subject: | |
GT mowog wrote: PM sent mate.
Oh and ANSWER YOUR GODDAMM PHONE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Sorry GT  If i knew where it was i would, its been MIA for the last 2 days
|
|
| Author: | GT mowog [ Sat Sep 04, 2010 3:52 pm ] |
| Post subject: | |
mini maxx wrote: GT mowog wrote: PM sent mate. Oh and ANSWER YOUR GODDAMM PHONE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Sorry GT If i knew where it was i would, its been MIA for the last 2 days 
|
|
| Author: | adamstuart [ Sat Sep 04, 2010 4:10 pm ] |
| Post subject: | |
mini maxx wrote: GT mowog wrote: PM sent mate. Oh and ANSWER YOUR GODDAMM PHONE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Sorry GT If i knew where it was i would, its been MIA for the last 2 daysSomeone should try ringing it ! |
|
| Author: | mini maxx [ Sat Sep 04, 2010 4:19 pm ] |
| Post subject: | |
Really????? do you think so......gee havnt tried that yet
|
|
| Author: | jimmyinamini [ Sat Sep 04, 2010 5:20 pm ] |
| Post subject: | |
mini maxx wrote: Really????? do you think so......gee havnt tried that yet oh so i guess you found it by now hehehe
i have rear donar donnuts in front of mine and they are brilliance |
|
| Author: | Irish Yobbo [ Sat Sep 04, 2010 6:13 pm ] |
| Post subject: | |
Kinda related: Is there any way of telling the height of the front donuts without actually checking the donuts? I'm talking about something like the distance between the top arm and the bump stop or similar. Measuring the actual height of the donuts while it's in the car is a bit of a pain. |
|
| Author: | GT mowog [ Sat Sep 04, 2010 6:23 pm ] |
| Post subject: | |
Irish Yobbo wrote: Kinda related:
Is there any way of telling the height of the front donuts without actually checking the donuts? I'm talking about something like the distance between the top arm and the bump stop or similar. Measuring the actual height of the donuts while it's in the car is a bit of a pain. If you park the car on a flat level surface, the drive shafts should be level too. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|