ausmini
https://www.ausmini.com/forums/

Trolley Jack Sale - Supercheap
https://www.ausmini.com/forums/viewtopic.php?f=2&t=65758
Page 1 of 2

Author:  Drexxle [ Sun Sep 19, 2010 3:06 pm ]
Post subject:  Trolley Jack Sale - Supercheap

If anyone needs a trolley jack,

Supercheap have 1400kg trolley jacks on sale for $19.95, best get in before the sale ends, has my work ten times easier.

Author:  minidrifter [ Sun Sep 19, 2010 4:39 pm ]
Post subject: 

sale ended yesterday!

Author:  drmini in aust [ Sun Sep 19, 2010 6:56 pm ]
Post subject: 

minidrifter wrote:
sale ended yesterday!

Well don't fret, now the sale is over, the listed prices will probably come back down to normal next week. :wink: :P

Author:  Lillee [ Sun Sep 19, 2010 6:58 pm ]
Post subject: 

I need to buy a lower one. like 90mm lowered height or something. Those cheap ones (which are very good don't get me wrong) are 140mm lowered height which is still too low for my car...

Author:  Morris 1100 [ Sun Sep 19, 2010 7:03 pm ]
Post subject: 

Lillee wrote:
I need to buy a lower one. like 90mm lowered height or something. Those cheap ones (which are very good don't get me wrong) are 140mm lowered height which is still too low for my car...
You just need a couple of 2" x 6" bits of timber and cut a ramp on one end, you just roll the car up the ramps onto the timber so you can slip the normal jack under it. :wink:

Author:  drmini in aust [ Sun Sep 19, 2010 7:05 pm ]
Post subject: 

Lillee wrote:
I need to buy a lower one. like 90mm lowered height or something. Those cheap ones (which are very good don't get me wrong) are 140mm lowered height which is still too low for my car...

You want a K-Mart one like mine.
It goes higher lift than my small one and comes down lower too.
Fits easy under the front tiebar mounts, even when the suspension is on the bump stops..

Author:  Lillee [ Sun Sep 19, 2010 7:13 pm ]
Post subject: 

Yeah I saw one of those Craftsman USA ones in the US, the ones they use for NASCAR racing. it was like a blade it was so low and 3 pumps it's at it's highest. I was drooling over it $500 USD...

Author:  Drexxle [ Sun Sep 19, 2010 7:28 pm ]
Post subject: 

sale ended yesterday???? why did i get it for 20 bux today :P :P :P

Author:  GT mowog [ Sun Sep 19, 2010 7:35 pm ]
Post subject: 

Drexxle wrote:
sale ended yesterday???? why did i get it for 20 bux today :P :P :P


Didn't you once say everything takes about a week longer in the Alice?

Which is THE only Australin Town which IS closest to every Australian Beach.

BTW, did you get time to take that pic?

Author:  Hanra [ Sun Sep 19, 2010 8:04 pm ]
Post subject: 

Lillee wrote:
I need to buy a lower one. like 90mm lowered height or something. Those cheap ones (which are very good don't get me wrong) are 140mm lowered height which is still too low for my car...


Best thing Ive ever bought!!!!!!!!!!


Image

Image

Image

Image

Author:  Mick [ Sun Sep 19, 2010 8:09 pm ]
Post subject: 

GT mowog wrote:
Drexxle wrote:
sale ended yesterday???? why did i get it for 20 bux today :P :P :P

Didn't you once say everything takes about a week longer in the Alice?


Not Today, Not Tommorrow, Not Tuesdays, Not Thursdays. NT, NT, NT, NT...

Author:  Tombo [ Sun Sep 19, 2010 9:48 pm ]
Post subject: 

I have a SCA 2 tonne jack, it gets under my minis tie bar mounts fine (it's just off the bumps). i would have preferred the 2.5T model, its wider (so more stable) and it goes both lower and higher.

Author:  Lillee [ Sun Sep 19, 2010 9:56 pm ]
Post subject: 

How much is the Kmart one Hanra??

Author:  Hanra [ Sun Sep 19, 2010 10:05 pm ]
Post subject: 

Kmart???

I bought it through Rapeco, it was $380.

Author:  drmini in aust [ Sun Sep 19, 2010 10:07 pm ]
Post subject: 

Lillee wrote:
How much is the Kmart one Hanra??

My long KMart one was around $60 I think.
Not sure what rating, I'll look tomorrow.

Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/