| ausmini https://www.ausmini.com/forums/ |
|
| Stroke Length 998 vs 1100 https://www.ausmini.com/forums/viewtopic.php?f=2&t=65804 |
Page 1 of 1 |
| Author: | Drexxle [ Mon Sep 20, 2010 11:18 pm ] |
| Post subject: | Stroke Length 998 vs 1100 |
Whats the length of the stroke on an 1100 crank. I have measured the length of the stroke from TDC to BDC and it is 84mm What would the stroke be on a 998 crank. [EDIT] doing some googlin, and I find this for a 1098 Bore: 64.60 mm Stroke: 83.70 mm and for a 998 Bore: 64.58 mm Stroke: 76.20 mm So i guess i answered my own question its a 1098. |
|
| Author: | GT mowog [ Tue Sep 21, 2010 7:13 am ] |
| Post subject: | |
I prefer 'Old Money' measurements 998 stroke = 3.0" 1100 stroke = 3.3" (longest standard stroke of any A series) |
|
| Author: | Irish Yobbo [ Tue Sep 21, 2010 8:55 am ] |
| Post subject: | |
Here's a good link, it has all the standard engine sizes: http://www.theminiforum.co.uk/index.php ... -my-engine |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|