ausmini
https://www.ausmini.com/forums/

Foot Pedals - Diamond or Square
https://www.ausmini.com/forums/viewtopic.php?f=2&t=65857		 Page 1 of 1
Author:  Drexxle [ Wed Sep 22, 2010 10:29 pm ]
Post subject:  Foot Pedals - Diamond or Square
So i have this Mini K Van 1/71

I have a box of spare parts. And i have two sets of pedals. Both the same frame, and both the same shape, length etc.

BUT

One has square pedals, and one has diamond pedals. My 75 Mini S has the diamond pedals in it. This Mini K, has the same doors as the S, and alot of similar features.

So, Diamond or Square.
Author:  GT mowog [ Thu Sep 23, 2010 5:42 am ]
Post subject: 
It would have been square originally and the rubbers stay on these better too.
Author:  gafmo [ Thu Sep 23, 2010 10:22 pm ]
Post subject: 
I Haven t heard the Diamond shape. What would have had it ?
Author:  mini maxx [ Thu Sep 23, 2010 10:25 pm ]
Post subject: 
My 1275LS has thev diamond shape so id presume its a later thing but so does my 71 clubbie :?
Author:  Lillee [ Thu Sep 23, 2010 10:26 pm ]
Post subject: 
Sounds like it's been modified
Author:  drmini in aust [ Thu Sep 23, 2010 10:27 pm ]
Post subject: 
All (I think) Clubby pedals were diamond shape.
When I converted my `matic to a manual (1310S) I cut down a Clubby clutch pedal to be square.
Clubbies are a good source of roundy parts...:mrgreen:
Author:  mini maxx [ Thu Sep 23, 2010 10:30 pm ]
Post subject: 
drmini in aust wrote:
Clubbies are a good source of roundy parts...:mrgreen:


Coopers are a good source for GT parts....... cheeky Doc :wink:
Author:  drmini in aust [ Thu Sep 23, 2010 11:05 pm ]
Post subject: 
mini maxx wrote:
drmini in aust wrote:
Clubbies are a good source of roundy parts...:mrgreen:


Coopers are a good source for GT parts....... cheeky Doc :wink:

Nah you can't use the roundy pedals in a GT, you'd have to weld crap onto them so they're diamond shaped... :P

Anyhow there's heaps more dead Clubbies than Coopers, most of em built at Enfield without the rotodip are self-destructing already. :lol:
Author:  mini maxx [ Thu Sep 23, 2010 11:07 pm ]
Post subject: 
drmini in aust wrote:
mini maxx wrote:
drmini in aust wrote:
Clubbies are a good source of roundy parts...:mrgreen:


Coopers are a good source for GT parts....... cheeky Doc :wink:

Nah you can't use the roundy pedals in a GT, you'd have to weld crap onto them so they're diamond shaped... :P

Anyhow there's heaps more dead Clubbies than Coopers, most of em built at Enfield without the rotodip are self-destructing already. :lol:

Soo would that make my RUST FREE 1275LS rarer than a cooper :?: :wink:
Author:  GT mowog [ Fri Sep 24, 2010 5:52 am ]
Post subject: 
The pedals went from square to diamond about 1974 or 75. The square one were fitted to the clubbies including GT's.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/