ausmini
https://www.ausmini.com/forums/

Oil Temp Guage sender fitting
https://www.ausmini.com/forums/viewtopic.php?f=2&t=65877
Page 1 of 1

Author:  jester99 [ Thu Sep 23, 2010 7:55 pm ]
Post subject:  Oil Temp Guage sender fitting

Anyone fitted one of these before?

http://www.minispares.com/Product.aspx?ty=pb&pid=35729

It is a housing to fit a mechanical type oil temp sender unit. You can fit it into your oil cooler lines.

I have an oil temp guage with sender etc, but have not been able to decide on how to fit the sender unit. i was thinking along the lines of the sump plug fitting, but thats not ideal as you would disturb it every time you do an oil change.

question i had for anyone who has one, does it leak? there is a fair bit of oil pressure in the cooler line, what are the chances of it leaking or a hose popping off?

Author:  bnicho [ Thu Sep 23, 2010 9:25 pm ]
Post subject: 

I've been looking at the same part, and had exactly the same questions... :)

Author:  MattE [ Sun Apr 07, 2013 7:48 am ]
Post subject: 

Here's one solution:

http://www.turbominis.co.uk/forums/inde ... t&tid=4569

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/