Another good reason to collect gearboxes
"Clubby's are a great source of roundy parts" - DrMini
| ausmini https://www.ausmini.com/forums/ |
|
| Old stock synchro rings, availability? https://www.ausmini.com/forums/viewtopic.php?f=2&t=65886 |
Page 1 of 1 |
| Author: | NG [ Fri Sep 24, 2010 7:28 am ] |
| Post subject: | Old stock synchro rings, availability? |
called mini spares last night. all genuine synchro rings have been sent back to rover or who ever. as there was to many complaints of failure after 1000miles lol. so all stock has been recalled. any idea's where i can get some solid old stock genuine synchro rings? is anyone aware of this problem? |
|
| Author: | Super-mini [ Fri Sep 24, 2010 7:41 am ] |
| Post subject: | |
old gearboxes |
|
| Author: | mini13 [ Fri Sep 24, 2010 7:51 am ] |
| Post subject: | |
Good! that last ones i had were shite! |
|
| Author: | drmini in aust [ Fri Sep 24, 2010 8:10 am ] |
| Post subject: | |
Get old ones out of gearboxes, if they still have .020" clearance from the gear's dogs, get that face surface ground by .020" and use them instead. Unlike many new ones now, they are round, bedded in and their taper angle is correct. The very best ones are pre-1969, these were forged and have `W" shaped marked on the outside. But the later ones work fine for road use if ground as said. |
|
| Author: | Lillee [ Fri Sep 24, 2010 10:37 am ] |
| Post subject: | |
Another good reason to collect gearboxes
"Clubby's are a great source of roundy parts" - DrMini |
|
| Author: | Mick [ Fri Sep 24, 2010 10:54 am ] |
| Post subject: | |
Oh..that reminds me... Thanks Doc 
|
|
| Author: | winabbey [ Fri Sep 24, 2010 2:46 pm ] |
| Post subject: | |
These were on ebay today - http://cgi.ebay.com.au/ws/eBayISAPI.dll ... MEDWX%3AIT |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|