ausmini
https://www.ausmini.com/forums/

Rear seat belts and a pair of child seat mounts
https://www.ausmini.com/forums/viewtopic.php?f=2&t=66060		 Page 1 of 1
Author:  cush [ Sat Oct 02, 2010 7:57 pm ]
Post subject:  Rear seat belts and a pair of child seat mounts
Where and how much?
Author:  minimanda [ Sat Oct 02, 2010 10:17 pm ]
Post subject:  Belt up
I know that http://www.minisport.com.au/category59_1.htm
has some.

Also ebay has a few but remember to get the plates as well.

Also http://www.minispares.com sells belts
Author:  Lillee [ Sat Oct 02, 2010 10:21 pm ]
Post subject: 
Cush, child seat mounts are entirely different thread and bolt size to seat belt anchorage plates that minisport sells so be wary of that. Otherwise those minisport plates are well worth the money.

Minisplus sells Klippan non-intertia lap sash belts for the cheapest I've seen.

You will still need to make a plate with 2 bolts welded to it for the buckles in the middle of the seat much like in a clubman

MSG me for more info
Author:  drmini in aust [ Sat Oct 02, 2010 10:43 pm ]
Post subject: 
Lillee wrote:
Cush, child seat mounts are entirely different thread and bolt size to seat belt anchorage plates that minisport sells so be wary of that. Otherwise those minisport plates are well worth the money.

Minisplus sells Klippan non-intertia lap sash belts for the cheapest I've seen.

You will still need to make a plate with 2 bolts welded to it for the buckles in the middle of the seat much like in a clubman

MSG me for more info

You mean `2x 7/16" UNF NUTS' mate..
:wink:
Author:  cush [ Sat Oct 02, 2010 11:39 pm ]
Post subject: 
Lillee wrote:
Cush, child seat mounts are entirely different thread and bolt size to seat belt anchorage plates that minisport sells so be wary of that. Otherwise those minisport plates are well worth the money.

Minisplus sells Klippan non-intertia lap sash belts for the cheapest I've seen.

You will still need to make a plate with 2 bolts welded to it for the buckles in the middle of the seat much like in a clubman

MSG me for more info


I imagine Image are for mounting the seatbelt to the parcel shelf. Can't they be used down the bottom? I'd need 6 of them, wouldn't I?
Author:  Benyni [ Sun Oct 03, 2010 7:58 am ]
Post subject:  seat belt hole!
i used the top bolt where the seat belt mounts!
Author:  justminis [ Sun Oct 03, 2010 8:23 am ]
Post subject:  Re: seat belt hole!
Benyni wrote:
i used the top bolt where the seat belt mounts!


Ben, early cars do not have the factory seat belt mounts in the rear like Clubby's do. My 6/70 K doesn't have them but my 12/70 K does, so were added by the factory around that time.
Author:  cush [ Sun Oct 03, 2010 8:44 am ]
Post subject: 
OH yeah... we're talking 1964 here, so it's all solid back there. :)
Author:  willy [ Mon Oct 04, 2010 12:29 am ]
Post subject: 
Michael, I suggest going and seeing Stuart @ Willshire Motor Trimmers.
I believe the image Minisport SA have used is the exact seatbelt plate (T51 WMT part number; 7/16" UNF thread), that WMT sell.

You'll also need the 5/16" UNF child anchor point plates too - I'm pretty sure the part number for these is T52 but Stuwey will sort you out.

Don't muck around with this stuff!
See the people that do the fitting every day :wink:

PS they certainly aren't almost $8.00 at WMT.


At least I am useful for something.
Author:  cush [ Mon Oct 04, 2010 1:01 am ]
Post subject: 
I can think of some uses for you...
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/