| ausmini https://www.ausmini.com/forums/ |
|
| Balancing https://www.ausmini.com/forums/viewtopic.php?f=2&t=67205 |
Page 1 of 1 |
| Author: | knuts2au [ Tue Nov 23, 2010 9:38 pm ] |
| Post subject: | Balancing |
I called into the machine shop to see how thing where going and he had been waiting for me. He had picked out the best 4 rods out of 8 i gave him (oval bigends) but they are 2 different pairs so i had to take them to another machine shop for balancing, before he fits the pistons. Should i be getting the crank balanced too? The pistons will be new. |
|
| Author: | drmini in aust [ Tue Nov 23, 2010 9:41 pm ] |
| Post subject: | |
Balancing crank is not a bad idea but you will probably find it's pretty close now. BMC didn't do a bad job, usually. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|