I found they can come loose, even with new spring washers. So now I put locknuts on em.
| ausmini https://www.ausmini.com/forums/ |
|
| Bolt size? https://www.ausmini.com/forums/viewtopic.php?f=2&t=67240 |
Page 1 of 1 |
| Author: | Wombat [ Thu Nov 25, 2010 4:20 pm ] |
| Post subject: | Bolt size? |
What is the size of the bolts that hold the front subframe to the firewall in the foot well? |
|
| Author: | Mick [ Thu Nov 25, 2010 4:29 pm ] |
| Post subject: | |
5/16 UNF x 3/4 with large load spreading washers in the footwell. |
|
| Author: | Wombat [ Thu Nov 25, 2010 4:36 pm ] |
| Post subject: | |
Thanks Mick |
|
| Author: | Mick [ Thu Nov 25, 2010 4:52 pm ] |
| Post subject: | |
I've been corrected ! 5/16 UNF x 7/8. Just a little longer. |
|
| Author: | drmini in aust [ Thu Nov 25, 2010 5:14 pm ] |
| Post subject: | |
I found they can come loose, even with new spring washers. So now I put locknuts on em.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|