Lot of do$h for a bare block of unknown size...
| ausmini https://www.ausmini.com/forums/ |
|
| Did anyone here buy the Clubman GT block on Ebay? https://www.ausmini.com/forums/viewtopic.php?f=2&t=67293 |
Page 1 of 2 |
| Author: | Morris 1100 [ Sat Nov 27, 2010 5:38 pm ] |
| Post subject: | Did anyone here buy the Clubman GT block on Ebay? |
If anyone here bought the Clubman GT block that was on ebay could they contact me. http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=120651864170&ssPageName=ADME:X:RTQ:AU:1123#ht_509wt_906 |
|
| Author: | minsta [ Sat Nov 27, 2010 6:16 pm ] |
| Post subject: | gt |
Hiya, I think he pulled the listing after I highlighted it in the ebay section as a moke motor.... cheers! jon |
|
| Author: | Morris 1100 [ Sat Nov 27, 2010 6:47 pm ] |
| Post subject: | |
He told me that he had sold it. Quote: Dear Morris 1100,
you are right some of the mokes did come out with the 1204's but also clubman gt's, engine is sold buyer made the research and is all correct |
|
| Author: | drmini in aust [ Sat Nov 27, 2010 6:59 pm ] |
| Post subject: | |
Lot of do$h for a bare block of unknown size...
|
|
| Author: | TK [ Sat Nov 27, 2010 7:01 pm ] |
| Post subject: | |
D Head I say when can you re-stamp any block. Too much dosh. |
|
| Author: | minsta [ Sat Nov 27, 2010 7:21 pm ] |
| Post subject: | GT |
hiya, I'm not sure, just noticed the listing went AWOL. I was of the belief 1204 was a Moke export block. Maybe everyone but the seller is wrong 
It will be sad if someone does up a GT and puts this block in only to be told it's a Moke engine........ cheers! jon |
|
| Author: | 74snail [ Sat Nov 27, 2010 7:28 pm ] |
| Post subject: | |
Yeah but how proud would the guy/ gal in the Moke be " Check this out , genuine GT block "
. |
|
| Author: | Morris 1100 [ Sat Nov 27, 2010 7:29 pm ] |
| Post subject: | |
It is an Export Moke block. There is no doubts. But then again the buyer may have already bought the Export Moke off ebay a couple of month back that had an 1100 motor. 
|
|
| Author: | minsta [ Sat Nov 27, 2010 7:35 pm ] |
| Post subject: | gt engine |
Hiya, I should have bought it. I have both Moke and GT projects - I could swap the engine over depending on which I want to drive
cheers! jon |
|
| Author: | 74snail [ Sat Nov 27, 2010 7:38 pm ] |
| Post subject: | |
Well, we will know who's GT is back on the road from the fresh set of Sunraysia rims . |
|
| Author: | ronniemac [ Sat Nov 27, 2010 10:01 pm ] |
| Post subject: | |
Yes my 1275 block has a 1204***** engine number and I was told it is out of a moke. |
|
| Author: | graham in aus [ Sat Nov 27, 2010 11:51 pm ] |
| Post subject: | |
Morris 1100 wrote: It is an Export Moke block. There is no doubts.
What he said! 9F/XE/Y, 1200, or 1205 are GT I have a 1204 that I took out of an export Moke (then cut it up )
|
|
| Author: | drmini in aust [ Sun Nov 28, 2010 8:56 am ] |
| Post subject: | |
graham in aus wrote: Morris 1100 wrote: It is an Export Moke block. There is no doubts. What he said! 9F/XE/Y, 1200, or 1205 are GT I have a 1204 that I took out of an export Moke (then cut it up )Well, now ya know what the block is worth! (maybe more than the Moke was) 
|
|
| Author: | Kennomini [ Sun Nov 28, 2010 6:57 pm ] |
| Post subject: | |
Why did you cut the block up? |
|
| Author: | 1310/71 [ Sun Nov 28, 2010 6:59 pm ] |
| Post subject: | |
Kennomini wrote: Why did you cut the block up?
He wanted to chrome it and make one of those "cutaways" you see at the motorshow
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|