ausmini
https://www.ausmini.com/forums/

Ebay Shocker Again
https://www.ausmini.com/forums/viewtopic.php?f=2&t=6762		 Page 1 of 2
Author:  gafmo [ Fri Apr 29, 2005 9:58 pm ]
Post subject:  Ebay Shocker Again
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 62972&rd=1

Karcraft half the price :lol:
Author:  J_A_M [ Fri Apr 29, 2005 10:09 pm ]
Post subject: 
:lol: someome will prolly still buy it..... :roll:
Author:  gafmo [ Fri Apr 29, 2005 10:12 pm ]
Post subject: 
Yer I bet :lol:
Author:  TK [ Fri Apr 29, 2005 10:18 pm ]
Post subject: 
Love the picture of a plastic bag on the slate tiles
Author:  CPOCSM [ Fri Apr 29, 2005 10:22 pm ]
Post subject: 
Is that for only 1 flare??

I just bought the Cooper original flimsy kit for the Clubby and they set me back $200 rods...

Rob Forsyth
Miniot!!
Author:  gafmo [ Fri Apr 29, 2005 10:28 pm ]
Post subject: 
These are the plastic ones you screw on LOL
Author:  CPOCSM [ Fri Apr 29, 2005 10:48 pm ]
Post subject: 
FFFF I hate pop rivets - shot myself in the foot with the discarded bit that breaks off - that will leave a mark!!

Rob Forsyth
Miniot!!
Author:  drmini in aust [ Fri Apr 29, 2005 10:59 pm ]
Post subject: 
gafmo wrote:
These are the plastic ones you screw on LOL

Yeah after you visit the boat shop for some SS self tappers that don't rust.. :lol: might cost you 10c each...
I saw a Mini at that Brookvale place one day- new paint, matching colour plastic flares, very nice... but after 1 week parked outside, the MS screws were rusty, and staining down the nice paintwork... grrrrr! hate those screws they come with!:x
Author:  gafmo [ Fri Apr 29, 2005 10:59 pm ]
Post subject: 
Now the hell did you do that...I use a one run by an air compressor...with no chance of that happening....You should not go anywhere near my Nail gun then :lol:
Author:  CPOCSM [ Fri Apr 29, 2005 11:23 pm ]
Post subject: 
The very front bit on the passengers side arch - hit the left foot right on the foot arch!! I should be OH & S aware and donn the appropriate workshop attire - not thongs!!

Nail guns are not a problem - very aware playing with those bad boys!

Rob Forsyth
Miniot!!
Author:  gafmo [ Fri Apr 29, 2005 11:34 pm ]
Post subject: 
:lol: Sorry I thought it was the Pot rivet.. :lol: 8)
Whn working with no shoes on you should be a little more carfull, as some one will comment on shortly...Me Standed dress
Author:  drmini in aust [ Sat Apr 30, 2005 6:55 am ]
Post subject: 
CPOCSM wrote:
The very front bit on the passengers side arch - hit the left foot right on the foot arch!! I should be OH & S aware and donn the appropriate workshop attire - not thongs!!

Nail guns are not a problem - very aware playing with those bad boys!

Rob Forsyth
Miniot!!

You can buy them singly, $20.14 each. :wink:
My RF one broke the lug where the front screw goes in. Buy a new one? Nah- I took it off, cleaned it all up inside, bunged it back on with Sikaflex sealer between it and the guard lip. Much stronger now! 8)
Author:  FatMaserati [ Sat Apr 30, 2005 12:55 pm ]
Post subject: 
Doc - "...Sikaflex sealer between it and the guard lip."

That's what I call "using the smarts". I'll do that when I get new arches put on. I think all my ones atm are damaged in some way.
Author:  TimM [ Sat Apr 30, 2005 2:01 pm ]
Post subject: 
drmini in aust wrote:
You can buy them singly, $20.14 each. :wink:


Forgive the stupid newbie question, but where do I get them for that price?

Are they the black plastic ones? or something else.


Tim
Author:  9YaTaH [ Sat Apr 30, 2005 3:39 pm ]
Post subject:  Update your profile...
TimM wrote:
drmini in aust wrote:
You can buy them singly, $20.14 each. :wink:


Forgive the stupid newbie question, but where do I get them for that price?

Are they the black plastic ones? or something else.


Tim


Tim...the Dr has a Karcraft catalogue he usually quotes from...are you in Sydney...no one can tell...
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/