ausmini https://www.ausmini.com/forums/ |
|
Mega jolt question help https://www.ausmini.com/forums/viewtopic.php?f=2&t=67765 |
Page 1 of 1 |
Author: | NG [ Tue Dec 21, 2010 12:22 pm ] |
Post subject: | Mega jolt question help |
i got it all running can see it doing the revs etc on the computer. at the moment i'm using the distributer. i hooked up the mega jolt but it is running like a bag of nails and is idling at about 500 revs maybe less on any map i load. even if i commit a new map still running like crap. one thing i have not done. is touched timing or timed it in with a timing light and i do not know how to do or start. sure it is easy ![]() the distributer is still in the engine, would i be right in thinking that even though i'm not running power to the coil or dizzy, still the dizzy will be giving me a mechanical advance? so the mega jolt wont run right with the dizzy all hooked up??? tried in limp mode but as i said dizzy is still in so that would be giving a advance no matter what? pretty confused but im booking it to get it tuned bit lost really. |
Author: | DTrain [ Tue Dec 21, 2010 2:13 pm ] |
Post subject: | |
if its not hooked up then its just spinning. best statement there in your last sentance |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |