| ausmini https://www.ausmini.com/forums/ |
|
| Mini Ha Ha https://www.ausmini.com/forums/viewtopic.php?f=2&t=6799 |
Page 1 of 2 |
| Author: | J_A_M [ Sun May 01, 2005 7:20 am ] |
| Post subject: | Mini Ha Ha |
 I drove Ha Ha yesterday.........I am still recovering!  Over 2700 rpm and it's.....HOLD ON!!
Damn that was fun!! The last car I drove with acceleration like that was a 308 stroker, but nothing beats the sound of an A series (or A+) in full song!! 
|
|
| Author: | gafmo [ Sun May 01, 2005 7:22 am ] |
| Post subject: | |
Fun ay Anton...I have not driven the revised version but the grin will last for a long time
|
|
| Author: | J_A_M [ Sun May 01, 2005 7:30 am ] |
| Post subject: | |
oh mate.....it was more than i expected!
I want a 1275 now.... 
|
|
| Author: | drmini in aust [ Sun May 01, 2005 7:33 am ] |
| Post subject: | |
Um... guys, it's going OK, but wait until I tune it!
|
|
| Author: | gafmo [ Sun May 01, 2005 7:39 am ] |
| Post subject: | |
Thats right you have just chuked it in
|
|
| Author: | drmini in aust [ Sun May 01, 2005 7:47 am ] |
| Post subject: | |
45 Dellorto carb on this 1360 is jetted pretty right (except could do with bigger idle jets), but I have NFI what ignition advance this one needs. Old 1310 with flat tops ran 41* full advance , I've got this one set around 38*(same bathtubbed 940 head).
No pinging, but I need to fiddle with it a bit. 
|
|
| Author: | 68matic [ Sun May 01, 2005 9:04 am ] |
| Post subject: | |
sounds bliss Doc besides the 1360 and weber anything else? |
|
| Author: | drmini in aust [ Sun May 01, 2005 9:12 am ] |
| Post subject: | |
Usual mods- RE-13 cam, Maniflow LCB, big valve head, 10.7:1 C/R, 1.5 rockers, blah blah. GR reckons it would have ~120HP at crank, but we didn't dyno it. I wanted to run it in properly. 
|
|
| Author: | Baracade [ Sun May 01, 2005 10:02 am ] |
| Post subject: | |
thats cool Doc... we will have to throw it on the dyno... next dyno day... Hey how long till our dyno day? I need two months or less & I will be on the road... |
|
| Author: | 68matic [ Sun May 01, 2005 10:04 am ] |
| Post subject: | |
is the head P&P'ed? and are those 1.5 rockers corolla rockers? |
|
| Author: | Lillee [ Sun May 01, 2005 5:35 pm ] |
| Post subject: | |
So i heard Anton! It's a beast huh? Not bad for an N/A A series auto block So I ask you now, is turbo worth it?? N/A is already scary fast! 
And people wonder why I fly the NA flag on this forum
|
|
| Author: | Lillee [ Sun May 01, 2005 5:37 pm ] |
| Post subject: | |
68matic wrote: is the head P&P'ed?
What do you think Duc?
It's probably one of the most worked top end engine on this forum! |
|
| Author: | drmini in aust [ Sun May 01, 2005 7:36 pm ] |
| Post subject: | |
No Duc, the rockers are MiniSpares 1.5 forged ones, not the Corollas. Those are in Barney..
|
|
| Author: | 68matic [ Sun May 01, 2005 8:43 pm ] |
| Post subject: | |
right
|
|
| Author: | drmini in aust [ Mon May 02, 2005 10:19 am ] |
| Post subject: | |
I just reset the ign timing... now 40* total at 4500rpm... if you thought it went hard before, Anton, you should drive it now! 
<edit> Yes I know it's a lot of advance but it's an open chamber head (no heart shape at all)..
Nooooo, it doesn't ping, either.
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|