Ausmini
It is currently Sat Jul 19, 2025 3:42 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Shocks!
PostPosted: Sun Jan 16, 2011 8:51 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Aug 13, 2004 3:45 am
Posts: 2360
Location: SE QLD
Hi there Mini minions,

Need some advice on what dampers to put on Henry('77 Mini S with Hi-Lo's). I thought of going the Spax road but I think they are more bling than anything else and have seen a good deal on front and back KYB gas-a-just dampers. Can anyone recommend these or , if not, a good alternative.

I will be buying soon as I have the trailing arms finished and all the rear subframe repainted and installed inthe car - kind of need the shocks before I can put the back-end jigsaw together again.

Thanks in advance...

Hooroo

Skins

_________________
Rob Forsyth
Miniot!!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 5:43 am 
Offline
Mods rock!
User avatar

Joined: Fri Oct 03, 2008 9:02 pm
Posts: 5079
The Spax are very good, possibly a little on the expenxive end of the scale for road use, but I wouldn't put them in the 'bling' category.

I have only used stock type KYBs so I can't offer comment on their Gas-a-just types, however they appear to be a copy of the Koni (read on).

Presently, for road use, I have been using Gaz Adjustables. For the price they are easily equal to or better than the Spax, however, it is likely that the Spax would last longer.

I used to use Koni's for the rears on the Mokes. They are easily made in to a coil over and are adjustable, although (as is the case with the KYBs) a PINA to adjust as it is necessary to detatch one end, fully compress to engauge the adjuster then rotate the body, refit. The Spax and Gaz versions not only have a finer adjustement, they also have a broader range.

For road use, use standard length ones, not the lowered types.

_________________
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 8:02 am 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 10:34 am
Posts: 2067
Location: Canberra
I put budget Gmax gas shocks in mine.

I'd recommend something else :P


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 8:19 am 
Offline
998cc
998cc
User avatar

Joined: Thu Jun 14, 2007 10:08 pm
Posts: 542
Location: Belconnen, Canberra
I run the KYB gas-adjusts on my Austin. I find them to be an excellent basic road shick.

I went for a nice fang yesterday on some roads of varying quality and my passenger, who is a very experienced sports sedan and Nb racer, was impressed by the ride quality and road holding.

Cheers,
Simon


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 8:23 am 
Offline
1098cc
1098cc
User avatar

Joined: Sun Oct 10, 2004 4:04 pm
Posts: 1533
Location: melbourne, victoria
I just recently purchased the Spax lowered adjustable and am liking them so far.

I looked around here and then looked online. I ended up getting them delivered from the UK for about 200 aud less than buying local including postage for a set of for. I like to support our economy but couldn't with a deal like that.

David


Top
 Profile  
 
 Post subject: Kyb
PostPosted: Mon Jan 17, 2011 3:30 pm 
Offline
1098cc
1098cc

Joined: Mon Jul 10, 2006 5:59 pm
Posts: 1275
Location: Bris / Syd
Also using kyb gas adjust find them to provide a comfortable solid ride.

_________________
PrOuDlY aSkInG qUeStIoNs FoR uR aMuEsMeNt


Top
 Profile  
 
 Post subject: Re: Kyb
PostPosted: Mon Jan 17, 2011 4:34 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Jan 11, 2005 9:07 pm
Posts: 1336
Location: Emu Plains, NSW
Fiji wrote:
Also using kyb gas adjust find them to provide a comfortable solid ride.

+1
Cheers Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 6:42 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
I put 4 std red Konis on Barney and surprisingly, found them way too soft. So I adjusted them a fair bit harder. Koni Sports may be better if available.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 6:57 pm 
Offline
998cc
998cc

Joined: Mon Jun 18, 2007 9:00 pm
Posts: 1127
Location: Down South
drmini in aust wrote:
I put 4 std red Konis on Barney and surprisingly, found them way too soft. So I adjusted them a fair bit harder. Koni Sports may be better if available.


From memory you can take the red Koni's into Pedders and they will re-valve them which makes then identical to the yellow Koni Sports.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 17, 2011 7:05 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
owen1975richard wrote:
drmini in aust wrote:
I put 4 std red Konis on Barney and surprisingly, found them way too soft. So I adjusted them a fair bit harder. Koni Sports may be better if available.


From memory you can take the red Koni's into Pedders and they will re-valve them which makes then identical to the yellow Koni Sports.

I think you mean Proven Products, not Pedders... but PP are in Wagga or somewhere now.
BTW Pedders shocks (I use on my hydro at front) are just Gabriels I think, made in China now.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 105 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.