| ausmini https://www.ausmini.com/forums/ |
|
| What resistance coil for A+ 65D Distributor https://www.ausmini.com/forums/viewtopic.php?f=2&t=68349 |
Page 1 of 1 |
| Author: | SuperCooper [ Thu Jan 20, 2011 8:47 am ] |
| Post subject: | What resistance coil for A+ 65D Distributor |
Anyone know what resistance coil to use for an A+ 65D Distributor? Cheers. |
|
| Author: | GT mowog [ Thu Jan 20, 2011 9:11 am ] |
| Post subject: | |
I don't have that to hand, however, the coils used in conjunction with those dissys was a Unipart GCL143. You could try to find (google) one of these. I have some other reference material which I'll look through. |
|
| Author: | GT mowog [ Thu Jan 20, 2011 9:15 am ] |
| Post subject: | |
Got it. 0.78 ohms @ 20 deg. +/- 0.08 ohms. |
|
| Author: | Hanra [ Thu Jan 20, 2011 9:16 am ] |
| Post subject: | |
0.7 to 0.86 ohms EDIT: GT's to quick! |
|
| Author: | SuperCooper [ Thu Jan 20, 2011 9:52 am ] |
| Post subject: | |
Thanks heaps guys. |
|
| Author: | SuperCooper [ Thu Jan 20, 2011 10:14 am ] |
| Post subject: | |
Found this : Rover Data Book http://www.docstoc.com/docs/14659018/DATA-BOOK |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|